{"title":"Kegland","description":"","products":[{"product_id":"5l-kegland-minikeg-growler","title":"5L Kegland MiniKeg optional Ball Lock Lid","description":"\u003cp\u003eAvailable as just the 5L MiniKeg with standard lid (as shown in photo).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOR ADD a \u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/minikeg-ball-lock-lid?_pos=4\u0026amp;_sid=346652c5e\u0026amp;_ss=r\" target=\"_blank\"\u003eBall lock Lid\u003c\/a\u003e (needed for full use a MiniKeg) as well as the included standard lid.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGreat for parties or to keep and serve your beer in the kitchen fridge. Due to the silicon dip tube on the ball lock lid (sold separately) you can serve beer from them whilst they are on their side. You don't even need to take the keg from the fridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5L is the same as 15 330ml beers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe've had the standard MiniKegs before but never stocked many as the quality wasn't good enough in our opinion. These kegs are a different story. They look fantastic, inside and out the welds are smooth and sanitary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Kegland Mini Kegs are pressure rated to 45PSI (this is stamped on the keg). Most other Mini Kegs we have seen have no pressure markings or manufacturing standards printed on them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eInformation from the manufacturer (Kegland in Australia):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMini Keg - 5L (175mm x 280mm)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe KegLand Small Stainless Steel Mini Beer Kegs are specifically designed for home brewing\/growler dispensing.  They are suited to small batches and suited to people who want to fit them into their standard domestic fridges.\u003c\/p\u003e\n\u003cp\u003eYou can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid (also available)\u003c\/p\u003e\n\u003cp\u003eThe Mini Kegs are made so they conveniently fit into a standard domestic refrigerator.   Due to the fact that these kegs use a flexible silicone dip tube\/spear the kegs can also be dispensed on their side or upright so irrespective of what is the most convenient orientation in your fridge you can stand the keg up or lie the keg down and the dip tube will always sink and draw liquid from the bottom (as it's heavier than beer).\u003c\/p\u003e\n\u003cp\u003eUnlike many other mini kegs these mini kegs use the gold standard acid bath electrolysis to pacify the stainless steel making the more resistant to rust than any other mini keg on the market. These mini kegs are the ONLY mini keg where we use a special technique whereby we weld the kegs from the inside out.  This means we get a superior welding finish that is more sanitary than any other mini keg available.  So if you are looking for the highest quality mini kegs that money can buy, this is what you have been waiting for!  Although there are many other mini kegs that come from China simply none of them have the same quality and finish as the genuine KegLand minikegs.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/U2jk0vo_0zU\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Just the MiniKeg with standard lid","offer_id":39665367973969,"sku":"255","price":40.0,"currency_code":"GBP","in_stock":true},{"title":"MiniKeg AND Ball Lock Lid (and standard lid)","offer_id":39665367941201,"sku":"255+270","price":65.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/5LKeglandMiniKegoptionalBallLockLid.jpg?v=1710259229"},{"product_id":"lid-o-ring-standard","title":"Lid O-Ring","description":"\u003cp\u003eReplacement corny style keg lid seal. Made of nitrile rubber like the original seals.\u003c\/p\u003e\n\u003cp\u003eTHIS ITEM IS JUST THE LARGE O RING (no smaller O rings supplied).\u003c\/p\u003e\n\u003cp\u003eIf you're looking for low O2 permeability - these nitrile O rings work great and according to Kegland have a \"good oxygen barrier performance\" (see exchange from their low O2 youtube video).\u003c\/p\u003e\n\u003cdiv class=\"style-scope ytd-comment-renderer\"\u003e\n\u003cdiv class=\"style-scope ytd-comment-renderer\" id=\"author-thumbnail\"\u003eQuote from LOw2 kegland video:\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"style-scope ytd-comment-thread-renderer\" id=\"replies\"\u003e\n\u003cdiv class=\"style-scope ytd-comment-replies-renderer\" id=\"expander\"\u003e\n\u003cdiv class=\"style-scope ytd-comment-replies-renderer\" id=\"expander-contents\"\u003e\n\u003cdiv class=\"style-scope ytd-comment-replies-renderer\" id=\"contents\"\u003e\n\u003cdiv class=\"style-scope ytd-comment-renderer\"\u003e\n\u003cdiv class=\"style-scope ytd-comment-renderer\" id=\"main\"\u003e\n\u003cdiv class=\"style-scope ytd-comment-renderer\" id=\"comment-content\"\u003e\n\u003cdiv class=\"style-scope ytd-expander\" id=\"content\"\u003eWhen you say \"standard\" the issue with the black ones is there are many different types. \u003cstrong\u003eThe nitrile black ones have good oxygen barrier performance\u003c\/strong\u003e but the issue is they have bad \"spring\" properties. The low2 o-rings have good spring and good barrier properties. \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":5380336812073,"sku":"401","price":1.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/IMG_5555.jpg?v=1629462102"},{"product_id":"nukatap-flow-control-stainless-steel","title":"NukaTap FC - Flow Control - G2","description":"\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003eThese are the brand new (July 2024) generation 2 flow control taps from Kegland.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eGeneration 2\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eThe NukaTap FC - G2 uses a completely new flow control mechanism with better sealing properties against the shank as well as improved flow control.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eAll Nukataps from BKT come with the appropriate spring as standard.\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eAvailable as just the tap or as a complete tap. \u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eChoose between:\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eJust the Tap\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFC Nukatap plus G2 upgrade kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eG2 Spring\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eComplete tap\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNukatap Stainless Steel FC G2 Tap \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStandard handle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4\" Stainless shank with john guest 3\/8\" fitting AND 5\/16\" duotight fitting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eG2 Spring (fitting is optional)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote: If you're buying a Nukatap Flow Control tap we advise adding a \u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/7-in-1-kegging-tool?_pos=1\u0026amp;_sid=0c98792bc\u0026amp;_ss=r\" target=\"_blank\"\u003ekeg tool\u003c\/a\u003e \u003c\/strong\u003eto your order as the shank collar will need tightening to make the seal leak free. The keg tool makes this easy to do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese taps are not recommended for commercial dispense of mixed gas (CO2\/N2) high pressure (30PSI or more) short feed (short beer line) systems. With sufficient beer line restriction they will be fine but if you are in doubt please contact us for advice. \u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/2UN9V2Hgr0Q?si=WMHQnGe25ll2Bt33\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"Nukatap","offers":[{"title":"Just the Tap","offer_id":32924068642897,"sku":"801","price":39.95,"currency_code":"GBP","in_stock":true},{"title":"Complete Tap","offer_id":32924068675665,"sku":"801+840+607+830","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/Untitled_design_53.png?v=1736245366"},{"product_id":"pair-of-premium-ball-lock-disconnect-mfl","title":"Pair of Premium Ball lock MFL disconnects with John guest fittings","description":"\u003cp\u003eWhats included:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Black Beer out MFL Kegland Premium Disconnect\u003c\/li\u003e\n\u003cli\u003e1x Grey Gas in\u003cspan data-mce-fragment=\"1\"\u003e MFL Kegland Premium Disconnect\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e2x John guest 1\/4\" FFL to 3\/8\" female push fit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKegland branded beer out and gas in ball lock disconnects with MFL fitting. John guest fittings can be screwed onto the MFL fitting to enable push fit connections with your beer line \/ gas line. This is easy to use and secure.\u003c\/p\u003e\n\u003cp\u003e2 John guest fittings are included with this item. These fittings are 3\/8 push fit.\u003c\/p\u003e\n\u003cp\u003eThese disconnects are much better than average disconnects made in China. They are guaranteed to give you many years of problem free use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":12179690618961,"sku":"515+516+2x604","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/Pairofpremiumballlockmfldisconnectswithjohnguestfittings.png?v=1709655283"},{"product_id":"5-16-od-clear-natural-beer-line","title":"EVA Barrier 5\/16\" Beer \/ Gas line - (8mm OD, 4mm ID)","description":"\u003cp\u003e\u003cspan\u003ePrice is per metre OR in 12m Lengths - MAX LENGTH 12m - if you order more than this it will come in 12m coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is Kegland's flexible superior quality beer line. Works well as beer line and typically you'll need around 2m for a medium carbonated beer (depending on temp and pressure).  Its what we use in our Series X kegerators for the beer line (2m).\u003c\/p\u003e\n\u003cp\u003eThis is more flexible than our standard 5\/16\" line.\u003c\/p\u003e\n\u003cp\u003eThis line will fit all 5\/16\" push fittings (duotight, john guest and DMfit).\u003c\/p\u003e\n\u003cp\u003eOutside Diameter: 8mm (5\/16\")\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInside Diameter: 4mm\u003c\/p\u003e\n\u003cp\u003eIf you'd like one of our Kegerator kits but with this line please drop us an email and we can sort that for you.\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Per Metre","offer_id":44751400698134,"sku":"908","price":1.35,"currency_code":"GBP","in_stock":true},{"title":"12m Coil","offer_id":44751400730902,"sku":"910","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/roll_of_evabarrier_4mm_tubing-01.jpg?v=1645038680"},{"product_id":"brewzilla-35l-gen3-1-1-bundle","title":"Gen 3.1.1 35L Brewzilla","description":"\u003cp\u003e\u003cstrong\u003eNew, Even Lower Price! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the Brewzilla Gen 3.1.1 35L All-in-one All-grain Brewery.\u003c\/p\u003e\n\u003cp\u003eWe've sold over 1000 of these to the UK and EU over the past 5 years. Kegland slowly evolved the Brewzilla Gen3 adding or improving lots of the features - mostly as a result of customer feedback.\u003c\/p\u003e\n\u003cp\u003eIf you want a manually operated machine, without the RAPT connectivity and extra features of the Gen4 Brewzilla (and want to save over £100) then this is a great option for getting into all grain homebrewing. \u003c\/p\u003e\n\u003cp\u003eWe back you up with a full 2 year UK based warranty - (we sort this from the UK, not Kegland). We guarantee that you'll hav e a fully working unit for at least 2 years (repairing or replacing your unit if necessary), and support customers with cost price parts and assistance well after the warranty has ran out should they need it. A quick look at our online feedback shows we are serious about customer support.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGet just the unit as it comes from Kegland or add an accessories bundle - \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd an accessories bundle (select from drop down menu) for £40\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e(a big saving) \u003c\/span\u003ewhich includes:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/hop-spider-large?_pos=1\u0026amp;_sid=25cc705d9\u0026amp;_ss=r\" target=\"_blank\"\u003eHop Spider\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/stainless-steel-mash-paddle?_pos=1\u0026amp;_sid=3201423d0\u0026amp;_ss=r\"\u003eStainless steel paddle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/brewzilla-gen-4-35l-jacket?_pos=5\u0026amp;_sid=ed1c789a6\u0026amp;_ss=r\" target=\"_blank\"\u003eBrewzilla 35L Gen3 Insulation jacket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/connection-kit-for-brewzilla-robobrew-immersion-chiller\" target=\"_blank\"\u003eImmersion chiller hose connection kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWe offer a 2 year full UK based warranty. The Brewzilla 3.1.1 is CE certified for sale in the UK\/ EU.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLink to instructions on the Kegland website \u003ca href=\"https:\/\/www.kegland.com.au\/media\/pdf\/BrewZilla%2035L%20-%20Instruction%20Manual.pdf\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInfo from Kegland:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe unit comes with the list of parts below:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSystem Includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImmersion Chiller\u003c\/li\u003e\n\u003cli\u003eDigital Backlit Temperature Control\/Display\u003c\/li\u003e\n\u003cli\u003eDelay Start Timer\u003c\/li\u003e\n\u003cli\u003eExtra handle on the base\u003c\/li\u003e\n\u003cli\u003eStep Mash Functionality\u003c\/li\u003e\n\u003cli\u003eMalt Pipe \u0026amp; Malt Pipe attachments\u003c\/li\u003e\n\u003cli\u003eNEW Ultra Low Density Dual Element Control (1900w and 500w)\u003c\/li\u003e\n\u003cli\u003eStainless ½” BSP Ball Valve with 13mm barb fitting.\u003c\/li\u003e\n\u003cli\u003eMagnetic drive pump mounted in the base of the unit \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Comparison with Grainfather Brewing system:\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/SCfTs-j5iQU\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eVideo Reviews for V3 with Pump:\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/0ECCbH20JVE?rel=0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Brewzilla","offers":[{"title":"No bundle","offer_id":47711290523926,"sku":"200","price":265.0,"currency_code":"GBP","in_stock":true},{"title":"Yes! Add Bundle","offer_id":47711290556694,"sku":"201","price":305.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/Gen3.1.135LBrewzilla_OptionsNewLowerPrice.jpg?v=1710261956"},{"product_id":"carbonation-cap","title":"Stainless Steel Carbonation Cap - BARBED","description":"\u003cp\u003e\u003cspan size=\"4\" style=\"font-size: large;\"\u003e\u003c\/span\u003e\u003cspan size=\"4\" style=\"font-size: large;\"\u003eTHIS FITTING HAS A BARBED CONNECTION UNDERNEATH- SEE PHOTO\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"4\" style=\"font-size: large;\"\u003eFully compatible with your Fermzilla.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSpecially machined to fit both types of ball lock disconnect - black (beer out) and grey (gas in).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCan be used for carbonating beer, bottling beer in PET (plastic screwtop - cooper brand) bottles.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial, sans-serif\" size=\"4\" style=\"font-family: Arial, sans-serif; font-size: large;\"\u003eWill fit most plastic bottles like coke, pepsi, tango etc. \u003c\/span\u003e\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":12636164980817,"sku":"503","price":7.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/Untitled_design_48.png?v=1732444233"},{"product_id":"19l-ball-lock-keg-brand-new","title":"Kegland New - 19L Corny Ball lock Keg - LOW2 SEAL","description":"\u003cp\u003e\u003cstrong\u003eNow with Low Oxygen Yellow Lid O-ring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnjoy a great quality brand new keg for just a little more than a reconditioned keg.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese are made by the same manufacturer as Intertap faucets and the Robobrew all grain brewing system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Kegs are NSF approved. (\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/www.nsf.org\/regulatory\/regulator-nsf-certification\" target=\"_blank\"\u003ewhat's NSF?\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese kegs are taller and have a smaller diameter compared to the AEB reconditioned kegs we sell.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003ePremium brand new KegLand kegs rated to 130psi working pressure and are made using a robotic orbital welding machine and super smooth welding marks making them easier to clean. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThese kegs are also passivated, giving them a matt finish, to ensure superior rust protection.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBlack rubber handles and base allows easier transportation and mess free handling.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLow2 Technology\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eFresher Longer\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003eThese new kegs are made with a high-barrier elastomer O-Rings to keep your beverage fresher for longer.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eUnlike Silicone O-Rings, LOW2 O-Rings are made from synthetic M-Class Cross-Linked elastomer for superior oxygen barrier properties to preven O2 ingress. This helps keep your beverage fresher for longer.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e130 PSI Operating Pressure\u003c\/li\u003e\n\u003cli\u003e19 L Capacity\u003c\/li\u003e\n\u003cli\u003eMade from 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eLid with PRV\u003c\/li\u003e\n\u003cli\u003eDry-Hop cylinder hook Welded into Lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOT INCLUDED - HOP TUBE FILTER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 24.75 in (629 mm)\u003c\/li\u003e\n\u003cli\u003eDiameter: 8.375 in. (213 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThere are some customer reviews of these kegs on the Morebeer site in the USA \u003ca href=\"https:\/\/www.morebeer.com\/products\/corny-keg-5-gallon-ball-lock.html\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eThese Kegs are made in China but not all Chinese kegs are equal - (see video)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/lEcPuYN15rg?controls=0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Kegland","offers":[{"title":"Default Title","offer_id":12653274529873,"sku":"019","price":72.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/KeglandNew-19LCornyBalllockKeg-LOW2SEAL.jpg?v=1746173769"},{"product_id":"9l-ball-lock-keg-brand-new","title":"Kegland NEW 9.5L Ball Lock Corny Keg","description":"\u003cp\u003eEnjoy a great quality brand new keg for just a little more than a reconditioned keg.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese are made by the same manufacturer as Intertap faucets and the Brewzilla all grain brewing system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Kegs are NSF approved. (\u003ca href=\"http:\/\/www.nsf.org\/regulatory\/regulator-nsf-certification\" target=\"_blank\"\u003ewhat's NSF?\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese kegs are taller and have a smaller diameter compared to the reconditioned kegs we sell.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003ePremium brand new KegLand kegs rated to 130psi working pressure and are made using a robotic orbital welding machine and super smooth welding marks making them easier to clean. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThese kegs are also passivated, giving them a matt finish, to ensure superior rust protection.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBlack rubber handles and base allows easier transportation and mess free handling.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e130 PSI Operating Pressure\u003c\/li\u003e\n\u003cli\u003e9.5 L Capacity\u003c\/li\u003e\n\u003cli\u003eMade from 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eLid with PRV\u003c\/li\u003e\n\u003cli\u003eDry-Hop cylinder hook Welded into Lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 14.5 in (369 mm)\u003c\/li\u003e\n\u003cli\u003eDiameter: 8.375 in. (213 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThere are some customer reviews of these kegs on the Morebeer site in the USA \u003ca href=\"https:\/\/www.morebeer.com\/products\/corny-keg-5-gallon-ball-lock.html\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eThese kegs are made in China but not all Chinese kegs are created equal... - (see video)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/lEcPuYN15rg?controls=0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Kegland","offers":[{"title":"Default Title","offer_id":12653300711505,"sku":"009","price":69.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/KeglandNEW9.5LBallLockCornyKeg_44ac9b6d-cba1-4cbd-abec-c8800e5c37f0.jpg?v=1709657591"},{"product_id":"10l-minikeg-party-kit","title":"10L MiniKeg Party Kit","description":"\u003cp\u003eGreat for parties or to keep and serve your beer in the fridge. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e This kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 litre\u003c\/strong\u003e Kegland Mini Keg\u003c\/li\u003e\n\u003cli\u003eBall lock lid with silicon flexible dip tube\u003c\/li\u003e\n\u003cli\u003eBeer out and Gas in MFL premium disconnects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini regulator\u003c\/strong\u003e (takes threaded 16g cartridges only)\u003c\/li\u003e\n\u003cli\u003eTAP depends on option chosen.\u003c\/li\u003e\n\u003cli\u003e5x 16g cartridge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote - FOAMING CONTROL - the party tap, pluto gun and flow control taps will control excessive foaming. The standard NukaTap (non FC) tap will only work well with low carbonation beer, or normal carbonation beer dispensed at low pressure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e10L is the same as 30 330ml beers.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe've had the standard MiniKegs before but never stocked many as the quality wasn't good enough in our opinion. These kegs are a different story. They look fantastic, inside and out the welds are smooth and sanitary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Kegland Mini Kegs are pressure rated to 45PSI (this is stamped on the keg). Most other Mini Kegs we have seen have no pressure markings or manufacturing standards printed on them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eInformation from the manufacturer (Kegland in Australia):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe KegLand Small Stainless Steel Mini Beer Kegs are specifically designed for home brewing\/growler dispensing.  They are suited to small batches and suited to people who want to fit them into their standard domestic fridges.\u003c\/p\u003e\n\u003cp\u003eYou can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid (also available)\u003c\/p\u003e\n\u003cp\u003eThe Mini Kegs are made so they conveniently fit into a standard domestic refrigerator.   Due to the fact that these kegs use a flexible silicone dip tube\/spear the kegs can also be dispensed on their side or upright so irrespective of what is the most convenient orientation in your fridge you can stand the keg up or lie the keg down and the dip tube will always sink and draw liquid from the bottom (as it's heavier than beer).\u003c\/p\u003e\n\u003cp\u003eUnlike many other mini kegs these mini kegs use the gold standard acid bath electrolysis to pacify the stainless steel making the more resistant to rust than any other mini keg on the market. These mini kegs are the ONLY mini keg where we use a special technique whereby we weld the kegs from the inside out.  This means we get a superior welding finish that is more sanitary than any other mini keg available.  So if you are looking for the highest quality mini kegs that money can buy, this is what you have been waiting for!  Although there are many other mini kegs that come from China simply none of them have the same quality and finish as the genuine KegLand minikegs.\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Nukatap SS - Keg mounted","offer_id":21572925292625,"sku":"1011","price":150.0,"currency_code":"GBP","in_stock":true},{"title":"Deluxe party tap","offer_id":21572965400657,"sku":"1012","price":140.0,"currency_code":"GBP","in_stock":true},{"title":"Pluto Gun","offer_id":21572965433425,"sku":"1013","price":145.0,"currency_code":"GBP","in_stock":true},{"title":"Nukatap SS Flow Control - Keg Mounted","offer_id":32681270476881,"sku":"1014","price":165.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/10LMiniKegPartyKit.jpg?v=1709809085"},{"product_id":"5l-minikeg-sodastream-kit","title":"5L MiniKeg Sodastream Kit","description":"\u003cp\u003eGreat for parties or to keep and serve your beer in the kitchen fridge. Due to the silicon dip tube on the ball lock lid you can serve beer from them whilst they are on their side. You don't even need to take the keg from the fridge.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 litre Kegland Mini Keg\u003c\/li\u003e\n\u003cli\u003eBall lock lid with silicon flexible dip tube\u003c\/li\u003e\n\u003cli\u003eBeer out and Gas in MFL premium disconnects\u003c\/li\u003e\n\u003cli\u003eKegland Mk4 regulator with Sodastream adapter (also works with full size cylinders)\u003c\/li\u003e\n\u003cli\u003eTAP depends on option chosen - see note below.\u003c\/li\u003e\n\u003cli\u003eGas line (2m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSODASTREAM CYLINDER NOT INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote - FOAMING CONTROL - the party tap, pluto gun and flow control taps will control excessive foaming. The standard NukaTap (non FC) tap will only work well with low carbonation beer, or normal carbonation beer dispensed at low pressure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e5L is the same as 15 330ml beers.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe've had the standard MiniKegs before but never stocked many as the quality wasn't good enough in our opinion. These kegs are a different story. They look fantastic, inside and out the welds are smooth and sanitary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Kegland Mini Kegs are pressure rated to 45PSI (this is stamped on the keg). Most other Mini Kegs we have seen have no pressure markings or manufacturing standards printed on them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eInformation from the manufacturer (Kegland in Australia):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe KegLand Small Stainless Steel Mini Beer Kegs are specifically designed for home brewing\/growler dispensing.  They are suited to small batches and suited to people who want to fit them into their standard domestic fridges.\u003c\/p\u003e\n\u003cp\u003eYou can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid (also available)\u003c\/p\u003e\n\u003cp\u003eThe Mini Kegs are made so they conveniently fit into a standard domestic refrigerator.   Due to the fact that these kegs use a flexible silicone dip tube\/spear the kegs can also be dispensed on their side or upright so irrespective of what is the most convenient orientation in your fridge you can stand the keg up or lie the keg down and the dip tube will always sink and draw liquid from the bottom (as it's heavier than beer).\u003c\/p\u003e\n\u003cp\u003eUnlike many other mini kegs these mini kegs use the gold standard acid bath electrolysis to pacify the stainless steel making the more resistant to rust than any other mini keg on the market. These mini kegs are the ONLY mini keg where we use a special technique whereby we weld the kegs from the inside out.  This means we get a superior welding finish that is more sanitary than any other mini keg available.  So if you are looking for the highest quality mini kegs that money can buy, this is what you have been waiting for!  Although there are many other mini kegs that come from China simply none of them have the same quality and finish as the genuine KegLand minikegs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"NukaTap SS Flow Control - Keg Mounted","offer_id":32681277423697,"sku":null,"price":165.0,"currency_code":"GBP","in_stock":true},{"title":"NukaTap SS - Keg Mounted","offer_id":21572975722577,"sku":"1051","price":150.0,"currency_code":"GBP","in_stock":true},{"title":"Deluxe party tap","offer_id":21572975755345,"sku":"1052","price":135.0,"currency_code":"GBP","in_stock":true},{"title":"Pluto Gun","offer_id":21572975788113,"sku":"1053","price":145.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/IMG_4820.jpg?v=1659626458"},{"product_id":"2x-5l-minikeg-sodastream-kit","title":"2x 5L MiniKeg Sodastream Kit","description":"\u003cp\u003eGreat for parties or to keep and serve your beer from the kitchen fridge. Due to the silicon dip tube on the ball lock lid you can serve beer from them whilst they are on their side. You don't even need to take the keg from the fridge.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2x 5 litre Kegland Mini Keg (10 litres total)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1x Ball lock lid with silicon flexible dip tube (you may want to buy an extra one)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBeer out and Gas in MFL premium disconnects (including John guest push fits)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eKegland Mk4 Regulator with Sodastream adapter (also works with full size cylinders).\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAP depends on option chosen - see note below.\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eGas line (2m)\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eSODASTREAM CYLINDER NOT INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote - FOAMING CONTROL - the party tap, pluto gun or flow control tap will control excessive foaming. The standard Nukatap (non FC) will only work well with low carbonation beer, or normal carbonation beer dispensed at low pressure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5L is the same as 15 330ml beers.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe've had the standard MiniKegs before but never stocked many as the quality wasn't good enough in our opinion. These kegs are a different story. They look fantastic, inside and out the welds are smooth and sanitary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Kegland Mini Kegs are pressure rated to 45PSI (this is stamped on the keg). Most other Mini Kegs we have seen have no pressure markings or manufacturing standards printed on them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eInformation from the manufacturer (Kegland in Australia):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe KegLand Small Stainless Steel Mini Beer Kegs are specifically designed for home brewing\/growler dispensing.  They are suited to small batches and suited to people who want to fit them into their standard domestic fridges.\u003c\/p\u003e\n\u003cp\u003eYou can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid (also available)\u003c\/p\u003e\n\u003cp\u003eThe Mini Kegs are made so they conveniently fit into a standard domestic refrigerator.   Due to the fact that these kegs use a flexible silicone dip tube\/spear the kegs can also be dispensed on their side or upright so irrespective of what is the most convenient orientation in your fridge you can stand the keg up or lie the keg down and the dip tube will always sink and draw liquid from the bottom (as it's heavier than beer).\u003c\/p\u003e\n\u003cp\u003eUnlike many other mini kegs these mini kegs use the gold standard acid bath electrolysis to pacify the stainless steel making the more resistant to rust than any other mini keg on the market. These mini kegs are the ONLY mini keg where we use a special technique whereby we weld the kegs from the inside out.  This means we get a superior welding finish that is more sanitary than any other mini keg available.  So if you are looking for the highest quality mini kegs that money can buy, this is what you have been waiting for!  Although there are many other mini kegs that come from China simply none of them have the same quality and finish as the genuine KegLand minikegs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"NukaTap SS Flow Control - keg mounted","offer_id":32681273557073,"sku":"1097","price":195.0,"currency_code":"GBP","in_stock":true},{"title":"Deluxe party tap","offer_id":21572995612753,"sku":"1055","price":160.0,"currency_code":"GBP","in_stock":true},{"title":"Pluto Gun","offer_id":21572995645521,"sku":"1056","price":170.0,"currency_code":"GBP","in_stock":true},{"title":"NukaTap SS (Non FC) - keg mounted","offer_id":39916187189329,"sku":"1098","price":185.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/IMG_4826.jpg?v=1659626367"},{"product_id":"kegland-mk4-beverage-co2-regulator-kl07429","title":"Kegland Mk4 Beverage CO2 Regulator","description":"\u003cp\u003e\u003cstrong\u003e2 YEAR WARRANTY\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES 3\/8\" (9.5mm) AND 5\/16\" (8mm) push fit connections.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is our superior regulator designed and made specifically for beverage dispense. These are more reliable and safer to use than welding regulators.\u003c\/p\u003e\n\u003cp\u003eIt is a quality product that will last a lifetime of use. We guarantee this regulator for 2 years. Don't get beer in it though - that will void your warranty...see our video\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Regulator is for life, not just for Christmas\" href=\"https:\/\/www.youtube.com\/watch?v=QbuKE7ttgMw\" target=\"_blank\"\u003ehere\u003c\/a\u003e. Check valves to prevent back flow are \u003ca title=\"Kegland 3\/8 check valve\" href=\"https:\/\/brewkegtap.co.uk\/products\/kegland-3-8-push-fit-check-valve\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca title='John guest 3\/8\" check valve' href=\"https:\/\/brewkegtap.co.uk\/products\/john-guest-3-8-check-valve\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e3\/8\" and 5\/16\" push-fit output\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInterchangeable Pressure Relief Valve (PRV) for safety (ONLY GREEN INCLUDED).\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e0-70 PSI output pressure (can be changed using different PRVs - sold separately)\u003c\/li\u003e\n\u003cli\u003eLarge easy to turn knob for easy adjustment\u003c\/li\u003e\n\u003cli\u003eWill fit a standard \"pub style\" CO2 cylinder (NOT mixed gas CO2\/N2)\u003c\/li\u003e\n\u003cli\u003eDials made from thicker steel to be more hardwearing\u003c\/li\u003e\n\u003cli\u003eM6 mounting bolt points on rear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available for mixed gas (N2\/CO2) or N2. And double output (for 2 different pressures).\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6Bkdu5-XqnY\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/QbuKE7ttgMw\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Kegland","offers":[{"title":"Default Title","offer_id":21578154213457,"sku":"705","price":44.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/IMG_5003_2.JPG?v=1562832195"},{"product_id":"kegland-mk4-beverage-co2-sodastream-regulator","title":"Kegland Mk4 Beverage CO2 Sodastream Regulator","description":"\u003cp\u003eThis is our superior regulator designed and made specifically for beverage dispense. These are more reliable and safer than welding regulators.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES 3\/8\" (9.5mm) AND 5\/16\" (8mm) push fit connections.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/8\" and 5\/16\" push-fit output\u003c\/li\u003e\n\u003cli\u003eIn-built pressure relief valve for safety.\u003c\/li\u003e\n\u003cli\u003e0-60 PSI output pressure.\u003c\/li\u003e\n\u003cli\u003einstructions for use. \u003c\/li\u003e\n\u003cli\u003eFitted with a Sodastream adapter to fit a sodastream CO2 cylinder.\u003c\/li\u003e\n\u003cli\u003eWill also fit a standard \"pub style\" CO2 cylinder if adapter is removed (NOT mixed gas CO2\/N2).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note, this regulator no longer comes the small metal barb fitting shown next to the plastic john guest output fitting.\u003c\/p\u003e\n\u003cp\u003eNo Sodastream cylinder included.\u003c\/p\u003e","brand":"Kegland","offers":[{"title":"Default Title","offer_id":21578201759825,"sku":"706","price":49.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/KeglandMk4BeverageCO2SodastreamRegulator_231b9be1-c6d3-4c6c-808e-e76e85da6819.jpg?v=1737535385"},{"product_id":"10l-kegland-minikeg-growler","title":"10L Kegland MiniKeg \/ Growler","description":"\u003cp\u003e\u003cspan\u003eGreat for parties or to keep and serve your beer in the kitchen fridge. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e10L is the same as 30 330ml beers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSize (without ball lock lid (optional) - 175mm x 488mm\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe've had the standard MiniKegs before but never stocked many as the quality wasn't good enough in our opinion. These kegs are a different story. They look fantastic, inside and out the welds are smooth and sanitary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Kegland Mini Kegs are pressure rated to 45PSI (this is stamped on the keg). Most other Mini Kegs we have seen have no pressure markings or manufacturing standards printed on them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eInformation from the manufacturer (Kegland in Australia):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMini Keg - 10l\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe KegLand Small Stainless Steel Mini Beer Kegs are specifically designed for home brewing\/growler dispensing.  They are suited to small batches and suited to people who want to fit them into their standard domestic fridges.\u003c\/p\u003e\n\u003cp\u003eYou can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid (also available)\u003c\/p\u003e\n\u003cp\u003eThe Mini Kegs are made so they conveniently fit into a standard domestic refrigerator.   Due to the fact that these kegs use a flexible silicone dip tube\/spear the kegs can also be dispensed on their side or upright so irrespective of what is the most convenient orientation in your fridge you can stand the keg up or lie the keg down and the dip tube will always sink and draw liquid from the bottom (as it's heavier than beer).\u003c\/p\u003e\n\u003cp\u003eUnlike many other mini kegs these mini kegs use the gold standard acid bath electrolysis to pacify the stainless steel making the more resistant to rust than any other mini keg on the market. These mini kegs are the ONLY mini keg where we use a special technique whereby we weld the kegs from the inside out.  This means we get a superior welding finish that is more sanitary than any other mini keg available.  So if you are looking for the highest quality mini kegs that money can buy, this is what you have been waiting for!  Although there are many other mini kegs that come from China simply none of them have the same quality and finish as the genuine KegLand minikegs.\u003c\/p\u003e\n\u003cp\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/U2jk0vo_0zU\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Just the MiniKeg with standard lid","offer_id":39906604515409,"sku":"260","price":55.0,"currency_code":"GBP","in_stock":true},{"title":"MiniKeg AND Ball Lock Lid (and standard lid)","offer_id":39906604548177,"sku":"260+270","price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/10LKeglandMiniKeg_Growler.png?v=1746174675"},{"product_id":"stainless-steel-mash-paddle","title":"Stainless Steel Mash paddle","description":"\u003cp\u003eStainless steel mash paddle for use during doughing in (stirring the grain into the hot water before the mash).\u003c\/p\u003e\n\u003cp\u003eThis paddle is 59cm in length and perfect for use with the 35L Brewzilla or similar all grain all-in-one brewing systems. Photo has a 12inch ruler next to it for scale.\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":22280746958929,"sku":"223","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/IMG_4883.jpg?v=1552477245"},{"product_id":"10l-minikeg-sodastream-kit","title":"10L MiniKeg Sodastream Kit","description":"\u003cp\u003eGreat for parties or to keep and serve your beer in the fridge. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit comes with the most recent sodastream adapter that is the most reliable one we've ever supplied. We have very few issues with these adapters from Kegland.\u003c\/p\u003e\n\u003cp\u003eThis kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 litre\u003c\/strong\u003e Kegland Mini Keg\u003c\/li\u003e\n\u003cli\u003eBall lock lid with silicon flexible dip tube\u003c\/li\u003e\n\u003cli\u003eBeer out and Gas in MFL premium disconnects\u003c\/li\u003e\n\u003cli\u003eMk4 Kegland reg with sodastream adapter attached (photo shows older mk3)\u003c\/li\u003e\n\u003cli\u003eTAP depends on option chosen.\u003c\/li\u003e\n\u003cli\u003eNO SODASTREAM CYLINDER IS INCLUDED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e10L is the same as 30 330ml beers.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe've had the standard MiniKegs before but never stocked many as the quality wasn't good enough in our opinion. These kegs are a different story. They look fantastic, inside and out the welds are smooth and sanitary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Kegland Mini Kegs are pressure rated to 45PSI (this is stamped on the keg). Most other Mini Kegs we have seen have no pressure markings or manufacturing standards printed on them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eInformation from the manufacturer (Kegland in Australia):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe KegLand Small Stainless Steel Mini Beer Kegs are specifically designed for home brewing\/growler dispensing.  They are suited to small batches and suited to people who want to fit them into their standard domestic fridges.\u003c\/p\u003e\n\u003cp\u003eYou can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid (also available)\u003c\/p\u003e\n\u003cp\u003eThe Mini Kegs are made so they conveniently fit into a standard domestic refrigerator.   Due to the fact that these kegs use a flexible silicone dip tube\/spear the kegs can also be dispensed on their side or upright so irrespective of what is the most convenient orientation in your fridge you can stand the keg up or lie the keg down and the dip tube will always sink and draw liquid from the bottom (as it's heavier than beer).\u003c\/p\u003e\n\u003cp\u003eUnlike many other mini kegs these mini kegs use the gold standard acid bath electrolysis to pacify the stainless steel making the more resistant to rust than any other mini keg on the market. These mini kegs are the ONLY mini keg where we use a special technique whereby we weld the kegs from the inside out.  This means we get a superior welding finish that is more sanitary than any other mini keg available.  So if you are looking for the highest quality mini kegs that money can buy, this is what you have been waiting for!  Although there are many other mini kegs that come from China simply none of them have the same quality and finish as the genuine KegLand minikegs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Nukatap - Stainless Steel","offer_id":22294509551697,"sku":"1011","price":160.0,"currency_code":"GBP","in_stock":true},{"title":"Deluxe party tap","offer_id":22294509584465,"sku":"1012","price":145.0,"currency_code":"GBP","in_stock":true},{"title":"Pluto Gun","offer_id":22294509617233,"sku":"1013","price":155.0,"currency_code":"GBP","in_stock":true},{"title":"Nukatap - Flow Control - Stainless Steel","offer_id":32681268150353,"sku":"1014","price":180.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/10LMiniKegSodastreamKit.jpg?v=1709918272"},{"product_id":"10l-minikeg-expansion-kit","title":"MiniKeg Expansion Kit","description":"\u003cp\u003eGreat to expand your Minikeg capacity if you've already got a tap and regulator. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded with the kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10L or 5L Kegland MiniKeg (select from options)\u003c\/li\u003e\n\u003cli\u003eBall lock lid (with silicon dip tube)\u003c\/li\u003e\n\u003cli\u003eBeer and Gas Ball lock disconnects with John guest push fit (3\/8\") fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eWe've had the standard MiniKegs before but never stocked many as the quality wasn't good enough in our opinion. These kegs are a different story. They look fantastic, inside and out the welds are smooth and sanitary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Kegland Mini Kegs are pressure rated to 45PSI (this is stamped on the keg). Most other Mini Kegs we have seen have no pressure markings or manufacturing standards printed on them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eInformation from the manufacturer (Kegland in Australia):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe KegLand Small Stainless Steel Mini Beer Kegs are specifically designed for home brewing\/growler dispensing.  They are suited to small batches and suited to people who want to fit them into their standard domestic fridges.\u003c\/p\u003e\n\u003cp\u003eYou can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid (also available)\u003c\/p\u003e\n\u003cp\u003eThe Mini Kegs are made so they conveniently fit into a standard domestic refrigerator.   Due to the fact that these kegs use a flexible silicone dip tube\/spear the kegs can also be dispensed on their side or upright so irrespective of what is the most convenient orientation in your fridge you can stand the keg up or lie the keg down and the dip tube will always sink and draw liquid from the bottom (as it's heavier than beer).\u003c\/p\u003e\n\u003cp\u003eUnlike many other mini kegs these mini kegs use the gold standard acid bath electrolysis to pacify the stainless steel making the more resistant to rust than any other mini keg on the market. These mini kegs are the ONLY mini keg where we use a special technique whereby we weld the kegs from the inside out.  This means we get a superior welding finish that is more sanitary than any other mini keg available.  So if you are looking for the highest quality mini kegs that money can buy, this is what you have been waiting for!  Although there are many other mini kegs that come from China simply none of them have the same quality and finish as the genuine KegLand minikegs.\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"10L MiniKeg Exp Kit","offer_id":22307781869649,"sku":"1015","price":85.0,"currency_code":"GBP","in_stock":true},{"title":"5L MiniKeg Exp Kit","offer_id":22862574649425,"sku":"1095","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/IMG_4894.JPG?v=1552662743"},{"product_id":"blowtie-diaphragm-spunding-valve","title":"BlowTie Diaphragm Spunding Valve Kit - V1","description":"\u003cp\u003e\u003cstrong\u003eNOTE - the dial sent will be 0-15PSI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you want a 0-40PSI dial check here: \u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/8mm-5-16-push-in-pressure-gauge-0-40psi-duotight-compatible?_pos=1\u0026amp;_psq=0-40\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\" rel=\"noopener\"\u003e0-40psi push fit gauge\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for use with the Fermzilla and much better and more sensitive than the standard spring mechanism spunding valve.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBlowTie Complete Kit (Diaphragm Spunding Valve)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Kit Includes:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x Blow Tie Spunding Valve\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x pushfit 5\/16\" tee piece\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x pushfit FFL to 5\/16\" fitting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x 5\/16\" Push in 0-15psi Gauge (different to 0-40PSI shown in photo)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Premium Ball Lock Disconnect (MFL) Grey\/Gas\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x 5\/16\" straight joiner piece\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePressure Fermentations\u003c\/span\u003e\u003cbr\u003eWith pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process.  The BlowTie has been designed specifically for this reason.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Transfers\u003c\/span\u003e\u003cbr\u003eWhen transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process.\u003c\/p\u003e\n\u003cp\u003eTraditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation.  Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.\u003c\/p\u003e\n\u003cp\u003eThe BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInstructions:\u003c\/span\u003e\u003cbr\u003eUse the yellow adjustment knob to control the pressure coming out of the pressure vessel.  Clockwise is higher pressure and anticlockwise is lower pressure.\u003cbr\u003eWe would recommend gassing a keg to a known pressure e.g. 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e1. Made from food grade acetal\u003cbr\u003e2. Stainless screws\u003cbr\u003e3. 8mm (5\/16\") push on both sides\u003cbr\u003e4. 0-40psi pressure rating\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: The black joiners are a semi-permanent fitting. You will not be able to remove the fittings easily. If you would like to have a completely removable fitted kit we would suggest using EVABarrier 4mm ID or 5mm ID hose as the joining pieces.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/B-sKQJFM6Ak?controls=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":22500868456529,"sku":"740","price":14.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/KL09706-BlowTieSpundingValveKit-01.webp?v=1715258930"},{"product_id":"19l-keg-jacket","title":"19L keg jacket","description":"\u003cp\u003e7-8mm of neoprene insulation for your 19L kegs.\u003c\/p\u003e\n\u003cp\u003eThese jackets protect and insulate your kegs, perfect for the summer BBQ season.\u003c\/p\u003e\n\u003cp\u003eFits best on the taller thinner kegs like our new Kegland 19L kegs but will fit onto the shorter and fatter type of 19L keg (23cm diameter) (like our reconditioned ones). \u003c\/p\u003e\n\u003cp\u003eThe jackets are strongly stitched but care must be taken when stretching over the shorter and fatter type of keg. \u003c\/p\u003e\n\u003cp\u003eJackets are branded “Kegland”.\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":23100556443729,"sku":"556","price":16.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/19Lkegjacket.jpg?v=1709809238"},{"product_id":"kegland-mk4-double-output-beverage-co2-regulator","title":"Kegland Mk4 Double Output Beverage CO2 Regulator","description":"\u003cp\u003eThe Kegland Mk3 was very popular so we are pleased to bring you the updated and even better Mk4 version.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis Regulator has 2 outputs and so can give 2 different pressures. Perfect if you want to have different beer styles at different levels of carbonation. If you just need one output see the single output version.\u003c\/p\u003e\n\u003cp\u003eThis is our superior regulator designed and made specifically for beverage dispense. These are more reliable and safer to use than welding regulators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE - Barb MFL fittings and alternative PRVs (shown in some of the photos) are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDual output at 2 different pressures.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3\/8 and 5\/16\" push-fit outputs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInterchangeable Pressure Relief Valve (PRV) for safety.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e0-70 PSI output pressure (can be changed using different PRVs sold separately)\u003c\/li\u003e\n\u003cli\u003eLarge easy to turn knob for easy adjustment\u003c\/li\u003e\n\u003cli\u003eWill fit a standard \"pub style\" CO2 cylinder (NOT mixed gas CO2\/N2)\u003c\/li\u003e\n\u003cli\u003eDials made from thicker steel to be more hardwearing\u003c\/li\u003e\n\u003cli\u003eM6 mounting bolt points on rear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available for mixed gas (N2\/CO2) or N2. And double output (for 2 different pressures).\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/6Bkdu5-XqnY\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Kegland","offers":[{"title":"Default Title","offer_id":23540164001873,"sku":"708","price":74.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/Untitled_design.jpg?v=1764754219"},{"product_id":"pre-order-stainless-steel-float-and-silicon-dip-tube-for-fermzilla-27l","title":"Stainless Steel Float and Silicon dip tube","description":"\u003cp\u003eFor use with the Fermzilla 55L AND 27L (or Fermentasaurus). Or as a dip tube in a corny keg (great if you ferment in your keg).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis 80cm silicone dip tube and stainless float was originally designed to suit the fermentasaurus generation 1 pressure kit but it also works great in various other kegmenters, or pressure rated fermenters. Even works in normal normal corny keg.\u003c\/span\u003e\u003cbr\u003eDip tube might need trimming for 27L version.\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":23607746232401,"sku":"336","price":11.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/ox9258_-_fermzilla_60cm_silicone_hose3.png?v=1563490506"},{"product_id":"fermzilla-27l-fermentation-jacket","title":"Fermzilla 27L \/ 60L all rounder Fermentation Jacket","description":"\u003cp\u003eThis jacket is designed to insulate your FermZilla during the colder months to keep your fermentation at the optimun temperature. It can also be used with a heating belt\/wrap to warm up the wort if the heat from the fermentation isn't enough.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis jacket is designed to fit either the 27L Fermzilla (gen2 or 3) and the 60L all rounder fermzilla.\u003c\/p\u003e\n\u003cp\u003eAlso completely blocks any light\/UV to prevent light stuck beer.\u003c\/p\u003e\n\u003cp\u003eThis is ideal if you aren't planning to use your Fermzilla in a temp controlled fridge.\u003c\/p\u003e\n\u003cp\u003eSee the new jacket in this video from Kegland:\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Q5hEC8k4GBU?start=650\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fermzilla","offers":[{"title":"Default Title","offer_id":23756434833489,"sku":"27-60JACK","price":38.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/kl11488_-_fermzilla_-_27l_jacket.png?v=1564664431"},{"product_id":"kegland-cannular-canning-machine-power-supply","title":"Kegland Power Supply - for Semi Auto Cannular and other Kegland products","description":"\u003cp\u003eTo use with your Cannular SEMI AUTO Canning Machine.\u003c\/p\u003e\n\u003cp\u003eWill also fit various other Kegland products - Maltzilla \/ Cannular - please email if you want to check compatibility\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComes with UK plug\u003c\/strong\u003e - EU plug adapter provided for EU orders.\u003c\/p\u003e\n\u003cp\u003eThis particular power supply is a high quality DC power supply with a IP67 Rating and also comes pre-wired with an anderson socket \u003c\/p\u003e\n\u003cp\u003eThis power supply comes with SSA, ROHS, CE, SELV, TUB and various other approvals.\u003c\/p\u003e\n\u003cp\u003eIt's made of high quality and can be used to power LED lights, and many other DC products.\u003c\/p\u003e\n\u003cp\u003eIt has overload protection, it's built in a robust aluminium housing and can easily be mounted to the wall.\u003c\/p\u003e","brand":"Kegland","offers":[{"title":"Default Title","offer_id":23810274951249,"sku":"CANPSU","price":95.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/img_20190718_112241.jpg?v=1578616464"},{"product_id":"kegland-cannular-canning-machine","title":"Semi-Auto Cannular Canning Machine from Kegland","description":"\u003cp\u003e\u003cstrong\u003eThe new Kegland Cannular comes pre-fitted with a CDL chuck - which lets you seam cans sourced in the UK without the need for swapping chucks (as used to be the case).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou may still need to adjust the rollers to get a perfect seal. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetailed instructions are \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/How_to_Setup_Cannular_With_VISY_Chuck.pdf?v=1734512855\" target=\"_blank\" rel=\"noopener\"\u003ehere\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/Semi_Automatic_Cannular_Instruction_Manual_a945fc90-0eba-42a5-a8a4-61b161869a21.pdf?v=1734513261\" target=\"_blank\" rel=\"noopener\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDue to the product costing more (as it includes the CDL chuck fitted), increased shipping costs, and a smaller quantity purchased (last batch we bought over 100!) we have had to increase the price of this item. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Semi Auto Cannular Canning machine from Kegland supplied by BrewKegTap comes with:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFree shipping to UK addresses with DPD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCDLE Chuck pre-fitted to the machine.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSemi-Auto Cannular Machine \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e24V Kegland Power supply (OPTION)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eKegland Splash guard (OPTION)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eFeeler gauge to help setting up\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts and Labour 1 year full warranty and life-time support.\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe don't currently sell cans.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-----------------------------------------------------------------------\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Cannular can seamer is a manual can seamer that is easy to use, reliable and beautifully simple and with this Semi-Auto Model it just got even easier.  Now you don't even have to pull a lever to seam the can.  The seaming process takes only 3 Seconds!  That's crazy fast.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhether you're a bar wanting to fill your own crowlers or you are a home brewer wanting to keep your home brew fresh and protected from damaging light, the Cannular is the answer.\u003cstrong\u003e \u003c\/strong\u003e The Cannular can seamer is one of the most compact and easy to use benchtop can seamers around.  With a single operator you can seam\/seal the cans in 3 seconds meaning this compact machine is suitable for small breweries or brewpubs doing small production runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSemi-Auto Design\u003c\/strong\u003e\u003cbr\u003eThis new Semi-Auto Model of can seamer is able to guarantee you get a consistent seaming process every time. Unlike our less expensive manual can seamer this machine has no lever meaning it's even easier for the operator to seam the can consistently and will not vary on how hard the operator is pulling the lever.  Once the machine is tuned only a small amount of oil on the bearings is required and no other maintenance for 50,000 cans.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafe To Use with Low Voltage Power Supply\u003c\/strong\u003e\u003cbr\u003eIf you have ever used a can seamer you would know that you can sometimes spill liquids while processing cans.  As a result, we have made the Cannular machine with 24v DC so even when you make a mess you don't have a risk of electrocuting yourself.  This also makes the machine easier to clean and wash down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmentally Friendly\u003c\/strong\u003e\u003cbr\u003eWhen compared with disposable glass bottles cans are\u003cstrong\u003e much\u003c\/strong\u003e more environmentally friendly as they are:\u003cbr\u003e* Significantly lighter making them less energy-consuming to transport\u003cbr\u003e* More recyclable, more cost-effective to recycle, and a higher percentage of cans get recycled in Australia when compared with glass\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGreat For Outdoor Events\u003c\/strong\u003e\u003cbr\u003eCans are a fantastic choice for outdoor events, parties, pool events, or at the beach.  Broken glass can be dangerous and difficult to clean up completely. Cans on the other hand are the safest choice in this respect.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreserve the Products Quality and Freshness\u003c\/strong\u003e\u003cbr\u003eGas Barrier - Although a glass bottle is completely airtight, the crown seals allows a small migration of CO2 out of the beverage and allows small amounts of oxygen to get ingress as the rubber seal is permeable.  So as a packaging solution glass bottles are imperfect and the product quality will degrade more rapidly due to this gas migration. Aluminium cans have a hermetic metal on metal seal that is impervious to gas transmission.\u003cbr\u003eLight Block - Many beverages especially beer can get damaged quickly due to light.  If you expose many beers to sunlight for even 5 minutes the beer can become light damaged (\"skunked\").  Even softer light such as indoor lights will damage beer over time and noticeable skunking can occur with both incandescent and fluorescent light globes within hours.  So unless you keep your glass bottles in the dark all the time you will compromise the beer quality.  Aluminium cans solve this problem by blocking 100% of damaging light.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GsE1aoNYVJw\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"just the Cannular (fitted with CDL Chuck)","offer_id":39331424108625,"sku":"CAN","price":520.0,"currency_code":"GBP","in_stock":false},{"title":"CDL Cannular with Power Supply","offer_id":39331424043089,"sku":"CAN+PSU","price":565.0,"currency_code":"GBP","in_stock":false},{"title":"CDL Cannular with Power Supply AND Splash Guard","offer_id":39331424075857,"sku":"CAN+PSU-SG","price":595.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/BEST_EVER_PRICE.png?v=1729350636"},{"product_id":"kegland-3-8-push-fit-check-valve","title":"3\/8” push-fit check valve","description":"\u003cp\u003e\u003cstrong\u003eWe currently have black check valves - they work the same as the one in the picture.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA third of the price of the john guest equivalent and does the same job.\u003c\/p\u003e\n\u003cp\u003e3\/8\" push fit both ends. Just cut your gas line and put this inline to ensure one way only flow. There is small white arrow to show direction. The blue end is the out end.\u003c\/p\u003e\n\u003cp\u003eOnly allows gas or liquid one way. Really useful in protecting your lovely new regulator from beer or cleaner flowing backwards into your regulator. Beer and regs don’t mix...\u003cbr\u003e\u003c\/p\u003e","brand":"John Guest","offers":[{"title":"Default Title","offer_id":23884528910417,"sku":"610","price":4.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/3_8_push-fitcheckvalve.jpg?v=1709814411"},{"product_id":"pressure-relief-valve-prv","title":"Pressure Relief Valve PRV","description":"\u003cp\u003eThese pressure relief valves are used in Corny style keg lids as well as our Kegland Mk4 and CORE 360 regulators, Mini kegs ball lock lids, Fermzillas and many more.\u003c\/p\u003e\n\u003cp\u003eNB - Some of our 19L recon keg lids have a tighter thread on the PRV port. If this is the case these won't fit - check photos. The wider threaded port will fit these PRVs.  \u003c\/p\u003e\n\u003cp\u003eGrey - 100PSI\u003c\/p\u003e\n\u003cp\u003eGreen - 65PSI\u003c\/p\u003e\n\u003cp\u003eRed - 35PSI\u003c\/p\u003e\n\u003cp\u003eYellow - 17PSI\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"35PSI (RED)","offer_id":23884972785745,"sku":"551","price":3.0,"currency_code":"GBP","in_stock":true},{"title":"100PSI (GREY)","offer_id":23884972720209,"sku":"553","price":3.0,"currency_code":"GBP","in_stock":true},{"title":"65PSI (GREEN)","offer_id":23884972752977,"sku":"552","price":3.0,"currency_code":"GBP","in_stock":true},{"title":"17PSI (YELLOW)","offer_id":44161872789782,"sku":"550","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/IMG_5579.jpg?v=1629465929"},{"product_id":"kegland-mk4-beverage-nitrogen-regulator","title":"Kegland Mk4 Beverage N2 \/ Mixed Gas Regulator","description":"\u003cp\u003e\u003cspan\u003eTHIS REGULATOR IS FOR NITROGEN OR MIXED GAS \/ PUB GAS. IF YOU HAVE A CO2 CYLINDER THIS WILL NOT WORK.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES 3\/8\" (9.5mm) AND 5\/16\" (8mm) push fit connections.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Kegland Mk3 was very popular so we are pleased to bring you the updated and even better Mk4 version.\u003c\/p\u003e\n\u003cp\u003eThis is our superior regulator designed and made specifically for beverage dispense. These are more reliable and safer to use than welding regulators.\u003c\/p\u003e\n\u003cp\u003eIt is a quality product that will last a lifetime of use.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e3\/8\" and 5\/16\" push-fit output.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInterchangeable Pressure Relief Valve (PRV) for safety.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e0-60 PSI output pressure (can be changed using different PRVs - \u003cstrong\u003esold separately\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eLarge easy to turn knob for easy adjustment\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWill fit a Nitrogen (N2) or Mixed gas (N2+CO2) cylinder.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eDials made from thicker steel to be more hardwearing\u003c\/li\u003e\n\u003cli\u003eM6 mounting bolt points on rear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available for CO2 only and CO2 double output (for 2 different pressures).\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6Bkdu5-XqnY\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Kegland","offers":[{"title":"Default Title","offer_id":23982325170257,"sku":"707","price":44.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/type-10-mk4-regulator-o2-ar-he-6-5bar-prv-and-100psi-gauge-kegland-1_12120aa0-8518-4221-88e8-28137afe5165.webp?v=1737535128"},{"product_id":"digiboil-35l-turbo-boiler","title":"Digiboil 35L Turbo Boiler","description":"\u003cdiv\u003e\n\u003cp\u003eThe Digiboil is a great sparge water heater, Brew-in-the-bag brewing system, or base unit for distilling. It's essentially a Brewzilla 35L without the pump and other extra parts or programmable steps.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDigiboil - get this if you want a sparge water heater or you are planning to get some of the distillation accesories. Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDigiboil 35l 2.4kW unit\u003c\/li\u003e\n\u003cli\u003eLid \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDigiMash upgrade - adds accessories to allow you to mash in your Digiboil.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eDigiMash includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDigiboil 35l 2.4kW unit\u003c\/li\u003e\n\u003cli\u003eLid\u003c\/li\u003e\n\u003cli\u003efalse bottom\u003c\/li\u003e\n\u003cli\u003emalt pipe and bottom plate \/ filter\u003c\/li\u003e\n\u003cli\u003emalt pipe handle\u003c\/li\u003e\n\u003cli\u003emalt pipe wire support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIt can also be used with our \u003ca href=\"https:\/\/brewkegtap.co.uk\/collections\/distilling\"\u003edistillation accessories\u003c\/a\u003e to distill with - seen \u003ca href=\"https:\/\/brewkegtap.co.uk\/collections\/distilling\"\u003ehere\u003c\/a\u003e. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePlease note, distillation of alcohol in the UK without the appropriate licence is illegal. \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e","brand":"BrewKegTap","offers":[{"title":"Just the DigiBoil","offer_id":32818885492817,"sku":"DIGI","price":125.0,"currency_code":"GBP","in_stock":true},{"title":"DigiMash","offer_id":32818885525585,"sku":"DIGI+MASH","price":180.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/KL07252_-_35L_DigiBoil_-01.webp?v=1769073852"},{"product_id":"brewzilla-65l","title":"Brewzilla 65L G4.1 - allgrain brewing system - READ ELECTRICAL INFO","description":"\u003cp\u003e\u003cstrong\u003eThese are the newer Gen 4 65L Brewzillas - with the more powerful 25W pump and the clear sight glass. Photos show the older Gen4.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePLEASE CHECK ELECTRICAL REQUIREMENTS BEFORE ORDERING.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eYou must read the info regarding power requirements below. We will not accept returns of opened \/ lightly used units if you fail to read the info below and then can't use the unit with your electrical system.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePLEASE CHECK ELECTRICAL REQUIREMENTS BEFORE ORDERING.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRead the electrical requirements below first.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eThis is a professional grade brewing machine and as such comes with professional level power requirements.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDue to their power requirements (15A \/ 3500W) the unit is too powerful to be used with a standard UK domestic plug \/ electrical system (standard UK plug are MAX 13A).\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eA qualified electrician will need to wire a dedicated 16A feed\/ circuit for use with the unit and fit a commando socket. As commando sockets are not fused you will need the appropriate level of protection (eg with a RCD or MCB) - a professional electrician will be able to advise.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIn the UK the unit comes with a commando plug lead. In the EU it will come with a standard EU plug.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThese units will work safely on standard domestic systems in the rest of Europe (not UK or IRE) as most EU domestic systems are 15A as standard (EU customers should double check this is the case in their country before purchase). \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf you have any questions please contact us, but in most cases you will need to consult an electrician if you are in the UK. We can give advice about the machine and its requirements but cannot advise you re electrical systems.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis Brewzilla Gen 4 includes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFree UK delivery by DPD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eBrewzilla 65L gen 4\u003c\/li\u003e\n\u003cli\u003e2 year full no-cost warranty and lifetime support\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA 2m IEC C19 to commando (IEC 60309) plug lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOPTIONAL - Add an accesories bundle (option of starter or complete bundle):\u003c\/p\u003e\n\u003cp\u003eStarter Bundle:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/hop-spider-large?_pos=1\u0026amp;_sid=25cc705d9\u0026amp;_ss=r\" target=\"_blank\"\u003eHop Spider\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/stainless-steel-mash-paddle?_pos=1\u0026amp;_sid=3201423d0\u0026amp;_ss=r\"\u003eStainless steel paddle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/brewzilla-65l-jacket?_pos=3\u0026amp;_psq=65l\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003eBrewzilla 65L Gen4 Insulation jacket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/connection-kit-for-brewzilla-robobrew-immersion-chiller\" target=\"_blank\"\u003eImmersion chiller hose connection kit\u003c\/a\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComplete Bundle:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/brewkegtap.co.uk\/products\/brewzilla-gen-4-35l-jacket?_pos=1\u0026amp;_sid=a66b679eb\u0026amp;_ss=r\" target=\"_blank\"\u003eBrewzilla Insulation jacket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/stainless-steel-mash-paddle\"\u003eMash paddle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/hop-spider-large\"\u003eKegland Hop spider\u003c\/a\u003e \u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/brewkegtap.co.uk\/products\/connection-kit-for-brewzilla-robobrew-immersion-chiller\" target=\"_blank\"\u003eImmersion chiller hose connection kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/brewzilla-whirpool-arm?_pos=1\u0026amp;_sid=f52a81fc1\u0026amp;_ss=r\"\u003eWhirlpool arm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/brewkegtap.co.uk\/products\/35l-brewzilla-gen-4-heat-exchanger-dish-hed?_pos=1\u0026amp;_sid=23d627485\u0026amp;_ss=r\" target=\"_blank\"\u003eHED (Heat Exchanger Dish)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/brewkegtap.co.uk\/products\/kegland-handy-clamp-for-brewzilla\" target=\"_blank\"\u003eHandy clamp (to clamp recirculation line to Brewzilla)\u003c\/a\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLoads of videos and more info \u003ca href=\"https:\/\/www.kegland.com.au\/products\/brewzilla-65l-gen-4?_pos=5\u0026amp;_psq=65l+brewzilla\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003ehere on the Kegland website\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e------------------------------------------------\u003c\/p\u003e\n\u003cp\u003eFROM KEGLAND: (will include links to the Kegland website - we have a lot of the items on our website)\u003cbr\u003e\u003cbr\u003evia the link below.\u003cbr\u003e\u003ca target=\"_blank\"\u003eDownload The Google Play Android App \u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003eThe Apple App Store RAPT App can be downloaded via the link below.\u003c\/div\u003e\n\u003cdiv\u003e\u003ca data-saferedirecturl=\"https:\/\/www.google.com\/url?q=https:\/\/play.google.com\/store\/search?q%3Drapt%26c%3Dapps\u0026amp;source=gmail\u0026amp;ust=1661304499005000\u0026amp;usg=AOvVaw3GBXFytdMzWtXtF9-p3XN7\" href=\"https:\/\/apps.apple.com\/th\/app\/rapt\/id1573192994\" target=\"_blank\"\u003ehttps:\/\/apps.apple.com\/th\/app\/\u003cwbr\u003erapt\/id1573192994\u003c\/wbr\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWifi \/ RAPT Integration\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eThe BrewZilla brewery type has been used across the world and won homebrew competitions in every country the brewery has been sold.  It's the most sold single vessel brewery worldwide and can be used for Home Brewing, Distillation, Preserve Canning, Sous Vide Cooking or just as a boiler. Our larger versions can also be used as a portable hot tub!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSome features that differentiate this brewery from other Brewery designs are:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eComplete Concave Draining Base\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe new base design completely drains out meaning you capture every single bit of wort. No longer do you need to tilt the brewery to extract every last bit of wort.  This also makes it suitable for CIP cleaning using our new Low Volume CIP Spray Rotor (\u003cspan data-sheets-formula='=REPLACE(R[0]C[-1],1,8,\"KL\")' data-sheets-userformat='{\"2\":4739,\"3\":{\"1\":2,\"2\":\"###\"},\"4\":{\"1\":2,\"2\":13624051},\"10\":2,\"12\":0,\"15\":\"arial,sans,sans-serif\"}' data-sheets-value='{\"1\":2,\"2\":\"KL04329\"}'\u003eKL04329\u003c\/span\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFalse Bottom Pump Protection Screen\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eOne of the key features of all the BrewZilla single vessel units is the false bottom protection screen. This screen avoids the need for doing a whirlpool and it filters wort and prevents more than 95% of hops and hot break getting sucked into the pump and thus greatly reduces the blocked pump issues that are often an issue with other brewery designs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUltra Low Watt Density\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe BrewZilla has significantly lower watt density than other breweries.  The main benefit of lower watt densities is that it enables you to produce lighter colours of beers that would otherwise get some caramelisation.  The ultra-low watt density also means you have less chance of boilovers, you get less crud sticking to the element making cleaning easier and ultimately reduces wear and tear on the element meaning even with significant abuse your elements will last way longer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRAPT\/Wifi Connected\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe new Gen 4 model is the first BrewZilla that connects to the \u003ca href=\"https:\/\/app.rapt.io\/\" title=\"RAPT Portal\"\u003eRAPT Portal \u003c\/a\u003e).  This portal allows you to track, record and monitor your brews online.  This greatly reduces the need for handwritten records of your brew day as it's all done automatically.  The RAPT portal also allows you to see every brew you have done in the past and control the brewery remotely so you can start pre-heating water remotely or simply keep an eye on the brewing process while you do something else.  Get push notifications to your mobile phone of when to add hops or start the boil.  \u003cbr\u003eAlong with this ease of access and control. The RAPT BrewZilla will also allow you to fully customise your brewday with profiles specifically tuned to your style of brewing or your recipe.\u003cbr\u003eFor example, you could set up your profile to receive certain alarms or messages when you are required to do something. E.g. Adding grain when the strike temperature is reached. Mash-Out Alarm when you're ready to sparge, Salt \/ Hop additions when you've reached the boil. As well as hop stand additions or chilling instructions. All of this at the touch of a button that is preprogrammed to what you want to do. No more egg timers, no more phone timers. Everything is controlled by one area.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBluetooth Gateway Device\u003cbr\u003e\u003c\/strong\u003eKegLand is currently developing various Bluetooth devices such as KL24334\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.kegland.com.au\/rapt-bluetooth-thermometer-20-to-300c-20cm-htc-probe\" title=\"Bluetooth low energy (BLE) thermometers\" target=\"_blank\"\u003eBluetooth low energy (BLE) thermometers\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand other sensors which will be compatible with this brewery.  This brewery is able to receive the BLE beacons and relay this information onto the RAPT portal.  Also by receiving multiple BLE thermometer sensors the Brewery is able to make smater and more automated decisions on how to control the brewing or distillilation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on\/off to achieve a core malt pipe temperature etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eImproved Base Design with Easy Access Pump\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eThe new base design means we have sealed all the electronics on the underside of the brewery into a separate junction box. This has allowed us to omit the bottom cover.  This significant design change means that the pump can be accessed much more easily.  It also means the plumbing can be changed more easily too. For instance, you can re-arrange the plumping to the pump to pump into the tap outlet or change this so the tap outlet bypasses the pump.  These changes make it more flexible but also much easier to take apart the pump for cleaning and maintenance if required.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRAPT Controller with Full Colour Screen\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe new RAPT controller has an easy-to-read full colour screen. The controller can also be disconnected easily making wash down easier.  The controller is mounted in a higher position with a tilting frame so you can angle the screen toward you depending on how tall you are.  The new controller module is packed with features and KegLand is consistently updating the firmware to include more features.  Firmware updates are quick and painless and with a single click you can upgrade all Gen 4 units to the latest firmware to take advantage of new features and accessories. Forget getting on your knees mid-brew, do it all while standing or sitting next to your BrewZilla.\u003cbr\u003eThe controller can also activate the pump. Meaning there are no toggle switches anywhere on the BrewZilla Gen 4.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e15amp IEC Cable for Easy Storage\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe new design has a removable IEC cable so you can unplug the cable making it neater for storage. If you need a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.kegland.com.au\/15amp-2-0mm-extension-lead-5m-with-led-light-australian-plug\"\u003e15amp extension cord you can purchase one here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eImproved Lid Handles\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe new lid handles are better designed and made from stainless so they are more robust and more ergonomic to hold especially with wet hands.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTwo Stage Oversized Malt Pipe\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThis new malt pipe design is 30% larger meaning you can mash more grains and either make more beer or make higher gravity beers.  the new malt pipe also has a two stage height adjustment so you hand half lift the malt pipe and set on the supporting halo ring halfway up.  This makes it more ergonomic so you can lift the heavy malt pipe up in two stages but has the second advantage that it makes the brewery more suitable for smaller batches too where raising the malt pipe halfway up is preferable. The new Gen 4 65L Malt Pipes also have a perforated section at the bottom to aid in sparging\/lautering flow speeds.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e680mm H (not including glass lid) x 405mm W\u003c\/p\u003e","brand":"Brewzilla","offers":[{"title":"Brewzilla (with no bundle)","offer_id":57122987639166,"sku":"211","price":670.0,"currency_code":"GBP","in_stock":false},{"title":"With Starter Bundle","offer_id":57122987671934,"sku":"211+65STARTER","price":720.0,"currency_code":"GBP","in_stock":true},{"title":"With Complete Bundle","offer_id":57122987704702,"sku":"211+65COMPLETE","price":740.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/kl27458_-_gen_4_-_65l_brewzilla_-_240v_au-01-01_9b855572-1c5e-413d-aae4-b927663bfc71.jpg?v=1700862195"},{"product_id":"brewzilla-whirpool-arm","title":"Brewzilla whirlpool arm","description":"\u003cp\u003e Suits both the 35L model and 65L. This accessory fits onto the existing recirculation pipe with a Stainless Steel Male Camlock fitting. The 6w internal magnetic pump will aid in circulating your wort for better hop extraction in the whirlpool stage, as well as help collect the hot break into the center of the false bottom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeeds to sent with DPD (due to size) please select this at checkout.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOther benefits may include speeding up cooling times by more movement of the wort in the boiler.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecifications:\u003cbr\u003e- 304 Stainless Steel\u003cbr\u003e- Fitted Male Camlock fitting\u003cbr\u003e- Soft Safety Grip\u003cbr\u003e- Length 520mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewzilla","offers":[{"title":"Default Title","offer_id":31364333043793,"sku":"222","price":19.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/Brewzillawhirlpoolarm.jpg?v=1709830008"},{"product_id":"60cm-thermowell-bulkhead-included","title":"60cm Thermowell - bulkhead included","description":"\u003cp\u003ePerfect for use with the Fermzilla but will fit almost any fermenter that has a flat surface at the top to mount the bulkhead fitting. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEasy to use\u003c\/p\u003e\n\u003cp\u003eMade from 304 stainless steel\u003c\/p\u003e\n\u003cp\u003e8mm (5\/16\") OD x 7mm ID.\u003c\/p\u003e\n\u003cp\u003eThis thermowell fits into any 8mm Hole and can literally be installed into almost any fermenter lid.\u003c\/p\u003e\n\u003cp\u003eHaving the thermowell attach to the lid of a fermenter is ideal as it means the penetration through the fermenter body is at the top of the fermenter not below the liquid line.  This makes the whole process more sanitary and reduces the number of difficult parts to clean.\u003c\/p\u003e\n\u003cp\u003eThis thermowell can be pushed through a bung with a 6-8mm hole but it's also includes the duotight bulkhead fitting that you can use to attach this thermowell to the lid of your KegMenter or FermZilla Fermenter.\u003c\/p\u003e\n\u003cp\u003eThis thermowell goes right into the middle of the core of your vessel meaning you get an accurate core reading of the liquid in the tank\/vessel.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/GQkdKbLAQNY\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":31456813613137,"sku":"248","price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/60cmThermowell-bulkheadincluded.jpg?v=1709824979"},{"product_id":"temp-twister-fermzilla-heating-and-cooling-coil","title":"Temp Twister - Fermzilla heating and cooling coil","description":"\u003cp\u003e\u003cstrong\u003eCAN ONLY BE SENT WITH DPD (TOO BIG FOR ROYAL MAIL)- PLEASE SELECT THIS OPTION AT CHECKOUT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for use with the Fermzilla.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComes with 2x 3\/8\" pushfits to mount \/ seal the temp twister into the fermzilla (or other fermenter lid)\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoil Diameter x Height: 9.5cm x 68cm High\u003c\/li\u003e\n\u003cli\u003eMaterial: 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eCoil Thickness: 9.5mm OD (3\/8\")\u003c\/li\u003e\n\u003cli\u003eCoil Lenth: 6meters\u003c\/li\u003e\n\u003cli\u003eHeat Transfer: With this coil submersed in liquid it will be able to absorb more than 250watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you want to shorten the arms on this cooling coil you can easily do this with a pipe cutter (or hacksaw)\u003c\/p\u003e\n\u003cp\u003eDo you want to use a glycol chiller to heat and cool your\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"FermZilla - Cooling Coil heating coil for glycol\" href=\"https:\/\/www.kegland.com.au\/brew-gear\/fermenters\/fermzilla.html\"\u003eFermZilla\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eor other fermenter or bright tank?\u003c\/p\u003e\n\u003cp\u003eThis coil can be adapted to fit any fermenter or bright tank that has an opening of 110mm diameter or larger.\u003c\/p\u003e\n\u003cp\u003eSimply drill to two 22mm holes in the lid of your fermenter and use the included duotight bulkhead fittings to attach the coil to the lid of your fermenter.\u003c\/p\u003e\n\u003cp\u003eIf you want to see how to use this product you can see it featured in this video below:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/GQkdKbLAQNY\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":31456876593233,"sku":"A3","price":28.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/img_20190725_172101.jpg?v=1574959322"},{"product_id":"fermzilla-55l-insulation-jacket","title":"Fermzilla 55L Insulation Jacket","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eGreat for insulating your Fermzilla if you don't have a fridge. With the TEMP TWISTER cooling \/ heating coil and a heating \/ cooling system this is a good alternative to putting your Femzilla in a large fridge.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt BKT HQ we've used the Fermentasaurus gen1 for a few years now - in fact we sold our SS-Brewtech Brewmaster Chronical once we got one - as we preferred it (believe it or not). True - its not as shiny but its 1\/4 the price and you can see the fermentation working (which is mesmerising). This new version works even better and has a few major improvements - the dump valve assembly looking like the most important. We can't wait for them to arrive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Q5hEC8k4GBU\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fermzilla","offers":[{"title":"Default Title","offer_id":31490798878801,"sku":"55JACK","price":42.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/1228.jpg?v=1575279294"},{"product_id":"2l-kegland-minikeg-growler","title":"2L Kegland MiniKeg \/ Growler","description":"\u003cp\u003e\u003cspan\u003eGreat for parties or to keep and serve your beer in the kitchen fridge. Due to the silicon dip tube on the ball lock lid (sold separately) you can serve beer from them whilst they are on their side. You don't even need to take the keg from the fridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2L is the same as 6 330ml beers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe've had the standard MiniKegs before but never stocked many as the quality wasn't good enough in our opinion. These kegs are a different story. They look fantastic, inside and out the welds are smooth and sanitary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Kegland Mini Kegs are pressure rated to 45PSI (this is stamped on the keg). Most other Mini Kegs we have seen have no pressure markings or manufacturing standards printed on them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eInformation from the manufacturer (Kegland in Australia):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMini Keg - 2L\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe KegLand Small Stainless Steel Mini Beer Kegs are specifically designed for home brewing\/growler dispensing.  They are suited to small batches and suited to people who want to fit them into their standard domestic fridges.\u003c\/p\u003e\n\u003cp\u003eYou can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid (also available)\u003c\/p\u003e\n\u003cp\u003eThe Mini Kegs are made so they conveniently fit into a standard domestic refrigerator.   Due to the fact that these kegs use a flexible silicone dip tube\/spear the kegs can also be dispensed on their side or upright so irrespective of what is the most convenient orientation in your fridge you can stand the keg up or lie the keg down and the dip tube will always sink and draw liquid from the bottom (as it's heavier than beer).\u003c\/p\u003e\n\u003cp\u003eUnlike many other mini kegs these mini kegs use the gold standard acid bath electrolysis to pacify the stainless steel making the more resistant to rust than any other mini keg on the market. These mini kegs are the ONLY mini keg where we use a special technique whereby we weld the kegs from the inside out.  This means we get a superior welding finish that is more sanitary than any other mini keg available.  So if you are looking for the highest quality mini kegs that money can buy, this is what you have been waiting for!  Although there are many other mini kegs that come from China simply none of them have the same quality and finish as the genuine KegLand minikegs.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/U2jk0vo_0zU\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":31839315755089,"sku":"1002","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/2LKeglandMiniKeg_Growler.jpg?v=1709811051"},{"product_id":"blowtie-v2-diaphragm-spunding-valve","title":"BlowTie Diaphragm Spunding Valve Kit - V2","description":"\u003cp\u003eThis is V2 Blowtie spunding valve with integrated pressure dial. Perfect for use with the Fermzilla and much better and more sensitive than the standard spring mechanism spunding valve. The standard dial with this valve is 0-15PSI. If you want a higher pressure you can buy a replacement dial or go for the V1 which is 0-40PSI.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eV2 BlowTie Complete Kit (Diaphragm Spunding Valve)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Kit Includes:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x V2 Blow Tie Spunding Valve (0-15PSI)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1x short length 5\/16” clear line\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Duotight 5\/16\" disconnect Grey\/Gas\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePressure Fermentations\u003c\/span\u003e\u003cbr\u003eWith pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process.  The BlowTie has been designed specifically for this reason.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Transfers\u003c\/span\u003e\u003cbr\u003eWhen transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process.\u003c\/p\u003e\n\u003cp\u003eTraditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation.  Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.\u003c\/p\u003e\n\u003cp\u003eThe BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInstructions:\u003c\/span\u003e\u003cbr\u003eUse the yellow adjustment knob to control the pressure coming out of the pressure vessel.  Clockwise is higher pressure and anticlockwise is lower pressure.\u003cbr\u003eWe would recommend gassing a keg to a known pressure e.g. 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e1. Made from food grade acetal\u003cbr\u003e2. Stainless screws\u003cbr\u003e3. 8mm (5\/16\") push on both sides\u003cbr\u003e4. 0-15psi pressure rating\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: The black joiners are a semi-permanent fitting. You will not be able to remove the fittings easily. If you would like to have a completely removable fitted kit we would suggest using EVABarrier 4mm ID or 5mm ID hose as the joining pieces.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/B-sKQJFM6Ak?controls=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":31845623365713,"sku":"741","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/integrated-gauge-blowtie-kit-0-15psi-kegland.webp?v=1713368214"},{"product_id":"inline-secondary-regulator","title":"Kegland Inline secondary regulator 5\/16\" or 3\/8\"","description":"\u003cp\u003eKegland in-line secondary regulator. \u003cbr\u003ecan easily be daisy chained to provide a variety of different pressures. \u003c\/p\u003e\n\u003cp\u003eAvailable in 2 versions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs it comes from Kegland (with 5\/16\" female push fit connections)\u003c\/li\u003e\n\u003cli\u003eWith extra 2 john guest fittings so it can be connected to 3\/8\" line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther pressure dials available from our shop.\u003c\/p\u003e","brand":"Kegland","offers":[{"title":"5\/16\" female push fit","offer_id":39749376704593,"sku":"720","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"With extra John Guest Fittings 3\/8\" female push fit","offer_id":39749376737361,"sku":"720+2x627","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/image_9769e64e-1454-46c0-9204-4e786a63ac28.jpg?v=1643880289"},{"product_id":"kegland-flow-stopper-automatic-keg-filler","title":"Kegland Flow Stopper - Automatic keg filler","description":"\u003cp\u003eThis really handy device is great for filling kegs, keg to keg transfers or fermenter to keg transfers.\u003c\/p\u003e\n\u003cp\u003eFantastic for use with Fermzillas or other pressurisable fermenters.\u003c\/p\u003e\n\u003cp\u003eSimply attach this device to the output gas post of your Keg then when the keg is full it will prevent further liquid exiting the gas post. This means you can literally set and forget and fill kegs automatically without the risk of kegs overflowing all over the floor.\u003c\/p\u003e\n\u003cp\u003eFor ultimate foam free keg filling pair with a \u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/blowtie-v2-diaphragm-spunding-valve\" title=\"Blow tie V2\" target=\"_blank\"\u003espunding valve\u003c\/a\u003e to maintain a constant head pressure (see video below from 4:40).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis flow stopper includes everything in the photo:\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2 x duotight 8mm x 5\/8 push in fittings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x ball float\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x stainless spring\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x straight 8mm joiners\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x acrylic sight glass (with 5\/8 male thread on either side)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x 3\/8\" elbow\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x duotight push fit (connects to disconnect (not included)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/OkmCl8c5tgk\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Kegland","offers":[{"title":"Default Title","offer_id":31881028796497,"sku":"542","price":12.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/IMG_5466.jpg?v=1582558994"},{"product_id":"dial-for-inline-reg-or-blowtie-v2","title":"Dial for Kegland Inline reg\/ Blowtie V2\/ Core 360","description":"\u003cp\u003eThese are the pressure dials that can be replaced on the inline \/ secondary Kegland reg (white), Blowtie V2 Spunding valve or the Core 360 regulator.\u003c\/p\u003e\n\u003cp\u003eThe 0-30 PSI dial is almost the same (in terms of precision) as the 0-15 dial due to the way the scales are arranged on the dial.\u003c\/p\u003e\n\u003cp\u003eJust the dial is included (Blowtie or In-line reg sold separately).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/B-sKQJFM6Ak?controls=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"0-15 psi","offer_id":31953499979857,"sku":"731","price":5.0,"currency_code":"GBP","in_stock":false},{"title":"0-30 psi","offer_id":31953503420497,"sku":"732","price":5.0,"currency_code":"GBP","in_stock":false},{"title":"0-60 psi","offer_id":31953503453265,"sku":"733","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/image_d595c09c-fcf0-487a-b1e2-256dbd60e10c.jpg?v=1583795284"},{"product_id":"fermzilla-ultimate-pressure-kit-v2","title":"Fermzilla Ultimate Pressure Kit V2 - Stainless Caps","description":"\u003cp\u003e\u003cstrong\u003eWITH STAINLESS STEEL CARB CAPS (also available with plastic caps)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/carbonation-cap\"\u003eour carbonation cap\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis Pressure kit gives you everything you need to get pressure fermenting in the Fermzilla - saving ££ compared to when bought separately.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFermzilla Ultimate Pressure Kit V2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Kit Includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x V2 Blow Tie Spunding Valve (0-15PSI)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e2x Stainless carbonation caps\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 stainless steel float with silicon dip tube\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1x short length 5\/16” clear line\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x pushfit FFL to 5\/16\" fitting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Premium Ball Lock Disconnect (MFL) Grey\/Gas\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePressure Fermentations\u003c\/span\u003e\u003cbr\u003eWith pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process.  The BlowTie has been designed specifically for this reason.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Transfers\u003c\/span\u003e\u003cbr\u003eWhen transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process.\u003c\/p\u003e\n\u003cp\u003eTraditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation.  Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.\u003c\/p\u003e\n\u003cp\u003eThe BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInstructions:\u003c\/span\u003e\u003cbr\u003eUse the yellow adjustment knob to control the pressure coming out of the pressure vessel.  Clockwise is higher pressure and anticlockwise is lower pressure.\u003cbr\u003eWe would recommend gassing a keg to a known pressure e.g. 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e1. Made from food grade acetal\u003cbr\u003e2. Stainless screws\u003cbr\u003e3. 8mm (5\/16\") push on both sides\u003cbr\u003e4. 0-15 psi pressure rating\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/B-sKQJFM6Ak?controls=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fermzilla","offers":[{"title":"Default Title","offer_id":31953534615633,"sku":"741 + 738","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/IMG_5647.jpg?v=1645185678"},{"product_id":"fermzilla-ultimate-pressure-kit-v1","title":"Fermzilla Ultimate Pressure Kit V1 - Stainless Steel Caps","description":"\u003cp\u003eWITH STAINLESS CARB CAPS (also available with red plastic carb caps)\u003c\/p\u003e\n\u003cp\u003e(\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/carbonation-cap\"\u003ehttps:\/\/brewkegtap.co.uk\/products\/carbonation-cap\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThis Pressure kit gives you everything you need to get pressure fermenting in the Fermzilla - saving ££ compared to when bought separately.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFermzilla Ultimate Pressure Kit V1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Kit Includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x Blow Tie Spunding Valve V1 starter kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2x Stainless carbonation caps (DIFFERENT FROM RED ONES IN PHOTO)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 stainless steel float with silicon dip tube\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePressure Fermentations\u003c\/span\u003e\u003cbr\u003eWith pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process.  The BlowTie has been designed specifically for this reason.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Transfers\u003c\/span\u003e\u003cbr\u003eWhen transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process.\u003c\/p\u003e\n\u003cp\u003eTraditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation.  Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.\u003c\/p\u003e\n\u003cp\u003eThe BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInstructions:\u003c\/span\u003e\u003cbr\u003eUse the yellow adjustment knob to control the pressure coming out of the pressure vessel.  Clockwise is higher pressure and anticlockwise is lower pressure.\u003cbr\u003eWe would recommend gassing a keg to a known pressure e.g. 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi\u003ci\u003e  \u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/B-sKQJFM6Ak?controls=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fermzilla","offers":[{"title":"Default Title","offer_id":31953537499217,"sku":"740 + 738","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/IMG_5649.jpg?v=1645185332"},{"product_id":"copy-of-fermzilla-60l-all-rounder","title":"Fermzilla 60L All Rounder with Ultimate Pressure Kit","description":"\u003cp\u003e\u003cstrong\u003eAvailable with ultimate pressure kit or without - \u003c\/strong\u003esee \u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/fermzilla-60l-all-rounder?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\"\u003ehere for 60l All Rounder \u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/fermzilla-60l-all-rounder?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\"\u003ewithout\u003c\/a\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/fermzilla-60l-all-rounder?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\"\u003e pressure kit.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 x 60L All rounder tank\u003cbr\u003e1 x 304 stainless stand\u003cbr\u003e1 x Airlock\u003cbr\u003e1 x Pressure rated lid\u003cbr\u003e1 x Digital temperature sticker\u003cbr\u003e1 x Red 2.5bar pressure relief valve\u003cbr\u003e1 x Graduation Sticker\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eALSO INCLUDES: BKT ULTIMATE PRESSURE KIT (SELECT FROM DROP DOWN)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x Stainless steel \u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/carbonation-cap\" target=\"_blank\"\u003eCarbonation cap\u003c\/a\u003e OR (recommended) \u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/plastic-fermzilla-carbonation-cap\"\u003ePlastic Carbonation Cap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/pre-order-stainless-steel-float-and-silicon-dip-tube-for-fermzilla-27l\" target=\"_blank\"\u003eStainless float and dip tube\u003c\/a\u003e (to dispense \/ sample from Fermzilla)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/blowtie-diaphragm-spunding-valve\" target=\"_blank\"\u003eBlowtie Spunding Valve\u003c\/a\u003e (for pressure fermenting and carbonation)\u003c\/li\u003e\n\u003cli\u003eDip Tube Filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAvailable Separately (not included):\u003c\/p\u003e\n\u003cp\u003eInsulated Jacket\u003c\/p\u003e\n\u003cp\u003eThermowell\u003c\/p\u003e\n\u003cp\u003eTemp Twister \u003c\/p\u003e\n\u003cp\u003e The 27L Fermzilla jacket also fits the 60L All rounder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to Clean\u003cbr\u003e\u003c\/strong\u003eThis fermenter is made from super smooth PET so it's easy to clean.  Just use s small scoop of\u003cspan\u003e PBW\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand wipe it clean after a 5 minute soak.  No scrubbing necessary.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLarge 120mm Opening\u003cbr\u003e\u003c\/strong\u003eThe opening at the top is signficantly larger then the older Snub Nose or other similar fermenters.  This bad boy has 120mm opening so even brewers with large arms can easily get into the top making cleaning even easier.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure Rated\u003c\/strong\u003e\u003cbr\u003eThis fermenter is rated up to 2.5bar so you can force carbonate just like a keg.  You can use this fermenter for closed transfers and signficiantly reduce oxygen exposure.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrystal Clear\u003c\/strong\u003e\u003cbr\u003eThe wall of the All Rounder is crystal clear so you can see what's going on inside.  This makes it really easy to determine visually how the fermentation, how the yeast is floculating etc.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpermeable\u003c\/strong\u003e\u003cbr\u003eThe PET plastic is not permeable like some other fermenters made from PP or HDPE.  The fermenter wall is a much better gas barrier keeping your product fresher for longer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Flavour and Aroma Carry Over\u003c\/strong\u003e\u003cbr\u003eOther HDPE fermenters tend to be so porous they carry flavour and aroma from one batch to another. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/FBywLQH6kwI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Fermzilla","offers":[{"title":"V1 \/ Plastic","offer_id":40125903306833,"sku":"60L + 740 + 737","price":80.0,"currency_code":"GBP","in_stock":false},{"title":"V1 \/ Stainless Steel","offer_id":40125903274065,"sku":"60L + 740 + 738","price":84.0,"currency_code":"GBP","in_stock":false},{"title":"V2 \/ Plastic","offer_id":40125903405137,"sku":"60L + 741 + 737","price":80.0,"currency_code":"GBP","in_stock":false},{"title":"V2 \/ Stainless Steel","offer_id":40125903372369,"sku":"60L + 741 + 738","price":84.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/3124_1.jpg?v=1701764493"},{"product_id":"fermzilla-ultimate-pressure-kit-v1-plastic-caps","title":"Fermzilla Ultimate Pressure Kit V1 PLASTIC CAPS","description":"\u003cp\u003eThis Pressure kit gives you everything you need to get pressure fermenting in the Fermzilla - saving ££ compared to when bought separately.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFermzilla Ultimate Pressure Kit V1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Kit Includes everything in the photo:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x Blow Tie Spunding Valve V1 starter kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2x Plastic red carbonation caps with ball lock fitting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 stainless steel float with silicon dip tube\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePressure Fermentations\u003c\/span\u003e\u003cbr\u003eWith pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process.  The BlowTie has been designed specifically for this reason.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Transfers\u003c\/span\u003e\u003cbr\u003eWhen transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process.\u003c\/p\u003e\n\u003cp\u003eTraditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation.  Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.\u003c\/p\u003e\n\u003cp\u003eThe BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInstructions:\u003c\/span\u003e\u003cbr\u003eUse the yellow adjustment knob to control the pressure coming out of the pressure vessel.  Clockwise is higher pressure and anticlockwise is lower pressure.\u003cbr\u003eWe would recommend gassing a keg to a known pressure e.g. 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi\u003ci\u003e  \u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/B-sKQJFM6Ak?controls=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fermzilla","offers":[{"title":"Default Title","offer_id":32066994438225,"sku":"740 + 737","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/image_2bc72911-7779-4efa-a460-4eb4d045ba9d.jpg?v=1586791653"},{"product_id":"fermzilla-ultimate-pressure-kit-v2-plastic-caps","title":"Fermzilla Ultimate Pressure Kit V2 Plastic Caps","description":"\u003cp\u003eThis Pressure kit gives you everything you need to get pressure fermenting in the Fermzilla - saving ££ compared to when bought separately.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFermzilla Ultimate Pressure Kit V2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Kit Includes everything in the photo:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x V2 Blow Tie Spunding Valve (0-15PSI)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e2x Red plastic carbonation caps\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 stainless steel float with silicon dip tube\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1x short length 5\/16” clear line\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x pushfit FFL to 5\/16\" fitting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Premium Ball Lock Disconnect (MFL) Grey\/Gas\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePressure Fermentations\u003c\/span\u003e\u003cbr\u003eWith pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process.  The BlowTie has been designed specifically for this reason.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Transfers\u003c\/span\u003e\u003cbr\u003eWhen transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process.\u003c\/p\u003e\n\u003cp\u003eTraditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation.  Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.\u003c\/p\u003e\n\u003cp\u003eThe BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInstructions:\u003c\/span\u003e\u003cbr\u003eUse the yellow adjustment knob to control the pressure coming out of the pressure vessel.  Clockwise is higher pressure and anticlockwise is lower pressure.\u003cbr\u003eWe would recommend gassing a keg to a known pressure e.g. 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e1. Made from food grade acetal\u003cbr\u003e2. Stainless screws\u003cbr\u003e3. 8mm (5\/16\") push on both sides\u003cbr\u003e4. 0-15psi pressure rating\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: The black joiners are a semi-permanent fitting. You will not be able to remove the fittings easily. If you would like to have a completely removable fitted kit we would suggest using EVABarrier 4mm ID or 5mm ID hose as the joining pieces.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/B-sKQJFM6Ak?controls=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fermzilla","offers":[{"title":"Default Title","offer_id":32066999648337,"sku":"741 + 737","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/image_e6963130-cf71-441f-a401-65ad65f5d65b.jpg?v=1586791812"},{"product_id":"fermzilla-27l-gen3-starter-kit","title":"Fermzilla 27L Gen3.2 TRI-CONICAL Starter Kit AND Ultimate Pressure Kit","description":"\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eThis is the brand new 27L Fermzilla (with easy grip handle) - with your choice of carbonation caps (standard plastic or upgrade to stainless steel), and your choice of spunding valve (we love the V1 for its large clear pressure dial and ease of servicing \/ dismantling). \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eThis kit will give you everything you need to get pressure fermenting.\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eIncluded in this kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFermzilla 27L Gen3.2 Starter Kit (with new EASY GRIP lid)\u003c\/li\u003e\n\u003cli\u003eUltimate pressure kit which includes:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/plastic-fermzilla-carbonation-cap\"\u003ePlastic Carbonation Cap\u003c\/a\u003e - or 2x Stainless Steel Carb Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/pre-order-stainless-steel-float-and-silicon-dip-tube-for-fermzilla-27l\" target=\"_blank\"\u003eStainless float and dip tube\u003c\/a\u003e plus new type weighted filter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBlowTie Spunding Valve Kit (\u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/blowtie-diaphragm-spunding-valve?_pos=6\u0026amp;_sid=6f8839009\u0026amp;_ss=r\u0026amp;variant=22500868456529\" target=\"_blank\"\u003eV1\u003c\/a\u003e or \u003ca href=\"https:\/\/brewkegtap.co.uk\/products\/fermzilla-ultimate-pressure-kit-v2\" target=\"_blank\"\u003eV2\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e\u003c\/b\u003eTo pressure ferment and dry hop using the collection vessel most people use 4 carbonation caps. You only need 2 for pressure fermentation. \u003c\/p\u003e\n\u003cp\u003eAll parts come with a one year BrewKegTap warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFrom Kegland:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFermZilla 27L Tri-Conical Starter Kit\u003cbr\u003eGeneration 3.2\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the Gen3 FermZilla Tr-Conical. Now with 3 Inch Tri-Clover ferrule molded into the tank and redesigned tri-clover dump valve. This unit was born from customer feedback we received on the Gen2 Model. No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clover FermZilla Range.\u003cbr\u003e\u003cbr\u003eThe new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget. With the FermZilla you have many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.\u003cbr\u003eThis is an incredible product at an extremely attractive price point in all the different sizes and models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWhat's new the difference between Gen2 and Gen3?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1. Molded 3 inch tri clover ferrule in the body of the FermZilla tank\u003cbr\u003e2. 3 inch to 2 inch tri clover Butterfly Valve\u003cbr\u003e3. 2 inch tri clover compatible Collection Container\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it easier to clean \/ take apart than the Gen2?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYES, It is by far the easiest Conical PET fermenter to disassemble and clean into all the nooks and crannies. Simply release all pressure inside the vessel and detatch the tri clover clamps.\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eInstructions:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo download the instruction sheet for this product click on the link below:\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003e\u003ca title=\"FermZilla 27L - Tri-Conical PDF Instruction Manual\" href=\"https:\/\/www.kegland.com.au\/media\/pdf\/FermZilla%20Tri-Conical%2027L%20and%2055L%20Instruction%20Manual.pdf\" target=\"_blank\"\u003e\u003cstrong\u003eFermZilla 27L - Tri-Conical PDF Instruction Manual\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003eDimensions:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo download the dimensioned drawings for this product click on the link below:\u003cbr\u003e\u003cspan\u003e\u003ca title=\"FermZilla 27L Tri-Conical Dimensioned Drawing\" href=\"https:\/\/www.kegland.com.au\/media\/pdf\/FermZilla%2027L%20Tri-Conical%20Dimensions.pdf\" target=\"_blank\"\u003eFermZilla 27L Tri-Conical Dimensioned Drawing\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003eWarnings:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePlease read the instructions thoroughly before use\u003c\/strong\u003e. The current version can be found in the '\u003ca\u003einstructions\u003c\/a\u003e' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.\u003cbr\u003e\u003cspan\u003eKeeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET. \u003cbr\u003eDo not expose to temperatures exceeding 35°C and pressure ferment past 5psi at these temperatures.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e:\u003c\/span\u003e\u003cbr\u003eWhen using this vessel under pressure.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eYou must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eevery time\u003c\/span\u003e\u003c\/strong\u003e. To do this. Fill your FermZilla up with some water, then apply a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eminimum\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eof 15psi pressure to the vessel. Check for leaks around all Cap \/ Threads by tipping it upside down, in all directions where there are risks of leakage. \u003c\/p\u003e\n\u003cp\u003eOccasionally these units may come with some small indentations\/dimples\/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic. \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/dRA6fe3eEvA\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Fermzilla","offers":[{"title":"Stainless Steel \/ V1","offer_id":32463245181009,"sku":"27L + 740 + 738","price":120.0,"currency_code":"GBP","in_stock":true},{"title":"Stainless Steel \/ V2","offer_id":32463245213777,"sku":"27L + 741 + 738","price":120.0,"currency_code":"GBP","in_stock":true},{"title":"Plastic \/ V1","offer_id":32463245246545,"sku":"27L + 740 + 737","price":115.0,"currency_code":"GBP","in_stock":true},{"title":"Plastic \/ V2","offer_id":32463245279313,"sku":"27L + 741 + 737","price":115.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/OR_1.png?v=1777995652"},{"product_id":"mash-kit-for-digiboil","title":"Mashing Kit for Digiboil","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eDigiMash upgrade - adds accessories to allow you to mash in your Digiboil.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMash Kit includes:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003efalse bottom\u003c\/li\u003e\n\u003cli\u003emalt pipe and bottom plate \/ filter\u003c\/li\u003e\n\u003cli\u003emalt pipe handle\u003c\/li\u003e\n\u003cli\u003emalt pipe wire support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIt can also be used with our \u003ca href=\"https:\/\/brewkegtap.co.uk\/collections\/distilling\"\u003edistillation accessories\u003c\/a\u003e to distill with - seen \u003ca href=\"https:\/\/brewkegtap.co.uk\/collections\/distilling\"\u003ehere\u003c\/a\u003e. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePlease note, distillation of alcohol in the UK without the appropriate licence is illegal. \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":32865178878033,"sku":"285","price":90.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/digimash-upgrade-kit-for-35l-digiboil-kegland-1_e52c29e4-c98b-4fce-a463-6905ddca60da.webp?v=1728565606"},{"product_id":"floating-dip-tube-filter-kegland","title":"Floating Dip Tube Filter - (80 Mesh 304 Stainless)","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eMade from HDPE and 304 Grade stainless steel this product can be boiled or sanitised in the full range of cleaners that we sell. The plastic HDPE is over moulded onto the stainless mesh to make a seamless finish. The end cap can easily pop off for cleaning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eHow frustrating is hops getting blocked in your poppet, tap, ball valves and practically everywhere else. This really handy little filter can be used on your silicone floating dip tubes to prevent hops or other solids getting sucked into the dip tube itself. The 304 stainless 80 mesh is fine enough to filter out hops and many other solids but not so fine that it gets blocked up easily. If you have a FermZilla or stainless Kegmenter this add on extra is a must.\u003c\/span\u003e\u003c\/p\u003e","brand":"BrewKegTap","offers":[{"title":"Default Title","offer_id":32876909002833,"sku":"508","price":1.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/kl16957_-_floating_dip_tube_filter.jpg?v=1611151520"},{"product_id":"brewzilla-3-1-1-upgrade-kit","title":"Brewzilla 3.1.1 Upgrade \/ Replacement Kit","description":"\u003cp\u003eThis kit can be used to upgrade an older Robobrew \/ Brewzilla to the latest 3.1.1 version. This gives you programmable mash steps and an updated circuit board (depending on the version you already have).\u003c\/p\u003e\n\u003cp\u003eThese parts can also be used to repair a Brewzilla out of warranty, \u003cstrong\u003eIf your Brewzilla is faulty and in warranty please contact us so we can sort it for free.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor full upgrade instructions look \u003ca href=\"https:\/\/www.kegland.com.au\/media\/pdf\/Brewzilla-Gen-3.1.1-circuit-board-instruction-manual.pdf\" target=\"_blank\"\u003ehe\u003c\/a\u003e\u003ca href=\"https:\/\/www.kegland.com.au\/media\/pdf\/Brewzilla-Gen-3.1.1-circuit-board-instruction-manual.pdf\" target=\"_blank\"\u003ere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eUpgrading from a: 3.0 to 3.1.1 = Both the LCD and Power Boards (PCB) will need to be purchased  3.1 to 3.1.1 = Only the LCD will need to be purchased\u003c\/p\u003e\n\u003cp\u003eTHIS KIT SHOULD  ONLY FOR INSTALLED A BY COMPETENT INDIVIDUAL. ALTHOUGH ITS QUITE STRAIGHT FORWARD, BKT ACCEPTS NO RESPONSIBILITY IF THE UPGRADE IS INSTALLED INCORRECTLY AND CAUSES DAMAGE TO THE BZ UNIT, DAMAGE TO OTHER PROPERTY OR INJURY. IF IN DOUBT MAKE SURE YOU GET A QUALIFIED PERSON TO DO THIS FOR YOU. ELECTRICITY CAN KILL.\u003c\/p\u003e","brand":"Brewzilla","offers":[{"title":"Both PCB and LCD Screen","offer_id":32909250035793,"sku":"351 + 352","price":45.0,"currency_code":"GBP","in_stock":false},{"title":"Just the LCD Screen","offer_id":32909250068561,"sku":"351","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"Just the PCB","offer_id":32909250101329,"sku":"352","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/Brewzilla3.1.1UpgradeKit.jpg?v=1709828344"},{"product_id":"kegland-series-x-kegerator-base-model","title":"Kegland Series X.1 Kegerator - Base Model","description":"\u003cp\u003eThis NEW Series X.1 kegerator model is a step up from the older Series X Model.  This new Series X.1 has several major advancements:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eIt is 25% more power efficient\u003c\/li\u003e\n\u003cli\u003e6% faster cooling\u003c\/li\u003e\n\u003cli\u003eThicker walls for improved insulation\u003c\/li\u003e\n\u003cli\u003eIntegrated Internal LED light (activated by door opening)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSHIPPING CAN TAKE UP TO A WEEK AND IS VIA A PALLET DELIVERY SERVICE. AFTER PURCHASE WE WILL CONTACT YOU TO ARRANGE DELIVERY. \u003c\/strong\u003e\u003cstrong\u003e(IF SCOTLAND \/ NON MAINLAND UK PLEASE SEE BELOW)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE - NO CO2 REGULATOR IS INCLUDED WITH THE BASE MODEL KEGERATOR (DIFFERENT TO ONE OF THE PHOTOS). \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping cost is for England and Wales mainland addresses only (not Scotland \/ NI, IOM, IOW etc) - please contact us for a quote if\u003cspan\u003e \u003c\/span\u003eyou are in these areas\u003cspan\u003e \u003c\/span\u003e(currently not shipping to EU).  We ship this item on a pallet and it costs a lot more to ship further afield than our standard DPD service.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis model is perfect if you plan to dispense commercial kegs. Get in touch and we can quote for a single tap tower with a commercial keg coupler (depends on type of beer \/ keg) and regulator.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003eAll Series X Kegerators require 10cm space around the sides for cooling. You can't fit these units into a fitted kitchen like a dishwasher or similar appliance.  \u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKegLand Kegland Series X - Kegerator Base Model\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNew \u0026amp; Improved features:\u003c\/span\u003e\u003cbr\u003e- Fits 4 x 19L Kegs\u003cbr\u003e- 30% Larger Evaporator\u003cbr\u003e- 25% Larger Condenser\u003cbr\u003e- 40% Thicker Side Walls for Reduced Heat Ingress.\u003cbr\u003e- 15% More Energy Efficient\u003cbr\u003e- 15% Faster Cooling\u003cbr\u003e- More Powerful and Able To More Efficiently Cool in Hotter Climates\u003cbr\u003e- Larger Compressor\u003cbr\u003e- Larger Font Fan\u003cbr\u003e- Improved Chill Plate\u003cbr\u003e- Improved Compressor\u003cbr\u003e- Improved bulkhead for twin gas line inlets. (Carb Cap Compatible)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eThe Series X Base Model Includes\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- 1 x Series X KegLand Fridge\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- 1 x Stainless Steel Guard Rail\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- 1 x CO2 Bracket Holder\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- 1 x Castor Wheel Set \u0026amp; bolts (2x locking, 2 non-locking)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- 1 x Reinforced Plastic Black Drip Tray\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eThis base model does not include a font\/tap set up, regulator, gas, kegs, beer \u0026amp; gas hosing.\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e- 600mm Wide\u003cbr\u003e- 640mm Deep\u003cbr\u003e- 845mm Height (excluding castor wheels and the height of guard rail, drip tray or font)\u003cbr\u003e- 890mm Height of the fridge part (including cator wheels but excluding the height of guard rail, drip tray or font)\u003c\/p\u003e","brand":"Kegland","offers":[{"title":"Default Title","offer_id":39247995535441,"sku":"","price":500.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/products\/fridge_only_-_front_xa_fb85a1f4-ccb5-4cbc-a3b8-b297b0539ef9.png?v=1720451142"},{"product_id":"kegerator-series-x-2-taps","title":"Kegland Series X.1 - 2 Tap Kegerator","description":"\u003cp\u003eThis NEW Series X.1 kegerator model is a step up from the older Series X Model.  This new Series X.1 has several major advancements:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eIt is 25% more power efficient\u003c\/li\u003e\n\u003cli\u003e6% faster cooling\u003c\/li\u003e\n\u003cli\u003eThicker walls for improved insulation\u003c\/li\u003e\n\u003cli\u003eIntegrated Internal LED light (activated by door opening)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSHIPPING CAN TAKE UP TO A WEEK AND IS VIA A PALLET DELIVERY SERVICE. AFTER PURCHASE WE WILL CONTACT YOU TO ARRANGE DELIVERY. \u003c\/strong\u003e\u003cstrong\u003e(IF SCOTLAND \/ NON MAINLAND UK PLEASE SEE BELOW)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe are offering the Series X as a complete kit with all the taps and fittings to serve from either 2, 3 or 4\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecorny kegs at once (kegs not included). This listing is for the 2 tap version - see our other listings for base unit, 3 or 4 tap systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eComes with everything a home-brewer needs to dispense their corny kegs \u003c\/span\u003e\u003cspan\u003e-  \u003c\/span\u003e\u003cstrong\u003eyou only need to\u003cspan\u003e \u003c\/span\u003eprovide\u003cspan\u003e \u003c\/span\u003ethe corny kegs and the CO2.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eIf you want to dispense commercial kegs (Sankey, Key Kegs etc) please get in touch and will custom design a solution for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAll Series X Kegerators require 10cm space around the sides for cooling. You can't fit these units into a fitted kitchen like a dishwasher or similar appliance.  \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eImproved features compared to the Series 4\u003c\/p\u003e\n\u003cp\u003e- 10% More Energy Efficient\u003cbr\u003e- 15% Faster Cooling\u003cbr\u003e- 40% Thicker Side Walls\u003cbr\u003e- 25% Larger Condenser\u003cbr\u003e- 30% Larger Evaporator\u003cbr\u003e\u003cstrong\u003e- FITS 4 (NEW KEGLAND) KEGS (ONLY 3 OF THE SHORTER RECONDITIONED TYPE - CHECK WITH US IF YOU ARE UNSURE)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping cost is for England and Wales mainland addresses only (not Scotland \/ NI, IOM, IOW etc) - please contact us for a quote if\u003cspan\u003e \u003c\/span\u003eyou are in these areas\u003cspan\u003e \u003c\/span\u003e(currently not shipping to EU).  We ship this item on a pallet and it costs a lot more to ship further further afield than our standard DPD service.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Kegerator as supplied by BKT includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiscounted delivery £25 (takes up to a week longer than our standard deliveries - see delivery page for dispatch times).\u003c\/li\u003e\n\u003cli\u003e1 x Keg Master Series X Kegerator Fridge with Font Fan Switch\u003c\/li\u003e\n\u003cli\u003e1 x HoneyComb Reinforced Black Plastic Drip Tray\u003c\/li\u003e\n\u003cli\u003e1 x Stainless Steel Guard Rail\u003c\/li\u003e\n\u003cli\u003e1 x Font Plug\u003c\/li\u003e\n\u003cli\u003e1 x Reinforced four-point anchored castor wheels with bolts. (2 Locking, 2 Non-Lockable)\u003c\/li\u003e\n\u003cli\u003e1 x CO2 Cylinder Bracket Holder for 2.6kg Cylinder (does not fit larger 6kg bottle common in the UK)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDOES NOT INCLUDE ANY KEGS\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2 Tap Kit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBEER \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChoice of 2\u003cspan\u003e \u003c\/span\u003eTaps\u003c\/li\u003e\n\u003cli\u003e2 x Liquid MFL disconnects with duotight fittings\u003c\/li\u003e\n\u003cli\u003eDouble font kit:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDouble Tap - Brushed Stainless Steel Font Only\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x duotight Compatible Short Shank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x Black Plastic Tap Handle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePre-Cut - 4mm ID x 8mm OD Evabarrier Beer Line\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x duotight 6.5mm x 8mm push in fittings to easily join the beer line to the tap shanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4 x Metric M5 stainless screws to secure the font to the fridge\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eGAS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Kegland mk4 CO2 Regulator\u003c\/li\u003e\n\u003cli\u003e5mm ID x 8mm OD Evabarrier Gas Line\u003c\/li\u003e\n\u003cli\u003eDuotight connectors and splitter\u003c\/li\u003e\n\u003cli\u003e2x Gas MFL disconnects with duotight fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThese kits are fully customise-able - please contact us for details.\u003c\/strong\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDimensions (according to Kegland):\u003c\/span\u003e\u003cbr\u003e- 600mm Wide\u003cbr\u003e- 640mm Deep\u003cbr\u003e- 845mm Height (excluding castor wheels and the height of guard rail, drip tray or font)\u003cbr\u003e- 890mm Height of the fridge part (including castor wheels but excluding the height of guard rail, drip tray or font)\u003c\/p\u003e","brand":"Kegland","offers":[{"title":"Nukatap Stainless","offer_id":39248013623377,"sku":"","price":555.0,"currency_code":"GBP","in_stock":false},{"title":"Nukatap Flow Control (Stainless)","offer_id":39248013656145,"sku":"","price":565.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2268\/6279\/files\/two-tap-series-x-kegerator-homebrew-draught-pack-kegland-2_1f9a8d06-fc78-4927-938f-6708d0224061.webp?v=1720449994"}],"url":"https:\/\/brewkegtap.co.uk\/collections\/kegland.oembed?page=15","provider":"BrewKegTap","version":"1.0","type":"link"}