Reconditioned 10L Corny Keg

We've changed how we categorise our reconditioned (recon) corny style 10L kegs. This is to offer better value to customers that want it. 

All our kegs (apart from the inferior category) are guaranteed to be gas tight, free from welds and perished rubber (that can leave black marks on your hands and surfaces).

We sort all the reconditioned kegs we receive into categories dependent on their condition (as below). We were the first UK online seller of kegs to do this. See our video below for a (not so quick..) guide to our categories.

All our kegs are guaranteed to seal.

These are all reconditioned to a fantastic standard - with all seals replaced, machine polished and stainless steel pressure relief valve fitted. 

Superior grade kegs (currently 2015 AEB) - No welds or significant dents in the walls of the keg or the base. The lid is in great condition and the lid opening isn't damaged or bent. Rubber is in good condition and doesn't leave any marks on surfaces / hands.

Standard grade kegs - The same as the superior grade but with more significant dents to the base or the walls of the keg. These dents are still quite small.

Inferior grade kegs - These will have at least one of the following:

• Very large Dents in the wall of the keg or rubber base or top
• Perished rubber that can leave marks on surfaces / hands
• Lid opening may have some dents (but will still seal)
• Weld(s) in keg wall leaving rough inside surfaces that can harbour possible infections  

The inside of the kegs are clean.

O rings have been replaced with new ones - 2 on each post, 1 on each dip tube and 1 on the lid. The plastic lid feet have also been replaced where necessary.

Kegs are all branded. We have various brands: AEB, SAFER, Cornelius or other Italian or German brands. All brands are the same size.

Why do these kegs cost more than the larger reconditioned 19L kegs? 

These cost us more to buy than the 19L equivalent kegs, so we have priced them appropriately. They are currently on sale at £60 each.  

Dimensions of 10L kegs:

340mm height

228mm diameter.

You would want a little more in height space for the disconnects - 5cm is plenty (barbed are lower/smaller than MFL with john guests)